NOTE:

1. The WiFi Version Sensor connect to WiFi 2.4GHz, Do not need hub.

2. The battery is not included in the package.

3. Do not support third-party smart speakers.

Product Features:

1. Water poof, water leak detection
The sensor can detect whether there are water leakage at the installation location. If this is found, the information will be pushed to the phone immediately.
2. Easy to Install
The installation of the sensor is very simple, you can use adhesive taps or screw (not included) set to install at the location you need to install, please note that the installation location can be connected to the WiFi router.
3. APP Remote Monitoring
The alarm information and records of the sensors are all stored on the server. This design allows us to monitor whether there is water in the home or office from any place through the smartphone. And can also share the control information of the device to others.
4. Low battery consumption
The power consumption of the sensor in standby mode is very small, and two LR03-1.5V AAA batteries can be used for one year. And when it detects that the battery is low, it will remind you to replace the battery through the alarm message.

APP Remote Control

Mobile APP control, connected to the network via Wi-Fi/3G/4G/5G, Remote control at any time. After the sensor detects the leak, it immediately pushes a message to your mobile APP.

Where can I use it?

You can install it in anywhere you worried about water leakage. For example: Kitchen, sink, bathroom, fish tank. Or you can use sensors to remind yourself that a container is full of water.

Working Principle

When the two feet of the detector was immersed by the water, the alert notifications will be pushed to your phone, be aware of water overflowing in time, reducing flooding risk.

WiFi 2.4GHz , no hub required

Multi device installation support

1, Any location with WiFi 2.4GHz /Zigbee cover can be installed
2, Generally, 2.4GHz WiFi can stably communicate within 400ft.(depending on the strength of the shelter, of course)
3, You can use your mobile phone to test the signal intensity. If you have more than 20% of the signal intensity, you can install it. In addition, 5GHz is shorter than 2.4GHz, so as long as you make sure you use 2.4GHz Wi-Fi test
4, How many sensor are connected at home depends on the capabilities of the Wi-Fi router

Product Parameter:

Power supply: Battery: LR03-1.5V/AAA*2（not include）
Wireless Type: Wi-Fi 2.4GHz IEEE 802.11b/g/n
App Name: Smart Life / Tuya smart (Supports Android 4.4 and iOS 8.0 or newer)
Material: ABS

APP Page Show

The page may be upgraded to better.

What is Included

Sensor*1,

3M adhesive taps Kit*1,

English User Manual*1

FQA

Q: How do I know my WiFi router has a frequency of 2.4GHz?

A: Most routers come with a 2.4GHz frequency band, and this information is usually marked on the router's nameplate. Some routers default to turning off the 2.4GHz frequency. Please refer to the router's manual to turn on the 2.4GHz frequency.

Q: Can I control it through 2G, 3G, 4G, 5G mobile networks?

A: YES. Operating Smart IR Remote through APP means that as long as your mobile phone can access the Internet (no matter what communication mode), APP can control it. But Smart IR Remote also needs to be constantly online through WiFi.

Q: What do I need to pay attention to when installing it?

A: 1. Please ensure that the WiFi signal at the installation location is good. 2 . The product is not waterproof and can only be used indoors. 3. Avoid facing heat sources such as sunlight, heaters, windows, etc.

Q: What kind of battery can I use?

A: LR03-1.5V Alkaline battery. WiFi connections require a lot of power, so it is necessary to have a high-quality battery to maintain its normal operation, and our product has a low battery warning.

Q: Is it using ESP series chips?

A: NO, We no longer manufacture products with built-in ESP series chips.

Q: Can multiple people use it?

A: YES. There are two methods: 1. You can use the sharing function to share with your friends or family. 2. You can create a virtual home

on the app and invite your family or friends to join.

Q: What do I need to do when configuration fails?

A: 1. Check whether the sensor is powered on or not. And ensure that the indicator light of Smart IR Remote is in fast flashing mode.

     2. Check whether your mobile device is connected to 2.4GHz WiFi network.

     3. Ensure that Smart Life has Bluetooth permission and confirm that the phone has Bluetooth turned on (some phones have low-power Bluetooth in GPS, if so, please ensure that the location information is turned on)

     4. Check your network connectivity, make sure the router is working properly.

     5. Make sure the WiFi password entered is correct when adding remote control.

     6. Confirm that the WiFi router does not have restricted access features, such as Mac address whitelist.

     7. If WiFi 2.4GHz and 5GHz use the same SSID, you can try changing the name and have your smartphone connect to WiFi 2.4GHz.

     8. If the configuration still fails, please turn off your phone's Bluetooth, long press the Smart IR Remote Reset Button for 5 seconds to switch the device's indicator light to slow flashing mode, and then add it using AP mode. Select the slow flashing indicator light option on the add page to enter AP mode, and the APP page will guide you through the operation.

Q: Why does the network testing function on the device properties page always fail?

A: In order to save power, the sensor will shut down the network for sleep when it is not necessary. The network testing function requires the device to be online and requires power consumption for long-term testing, and the battery of the sensor cannot guarantee long-term operation. When testing the network, the sensor is sleeping, so it will fail, and we believe it is also meaningless. Of course, the sensor will start reporting data at a fixed time, or when the temperature or humidity changes exceed the set value, the triggering mechanism will wake up the sensor to start the network and send data.

Q: Does this sensor support third-party smart speakers?

A: Very sorry, it is not supported.