Tuya 8 Way Relay Switch Module 8 DC 7-27V wifi/ Wireless Smart Home Remote Control Switch with RF 433MHZ

Note:

If you don't have a Zigbee gateway,please choose WiFi version!

https://www.aliexpre.com/item/1005005236418545.html

[wifi remote] (basic function):

Download "Tuya Smart" from the market, install and register, power off the module and restart it, open the APP, and click the + sign in the upper right corner to add devices.【Remote control】Only supported if you have purchased a remote control) (If there is a f that does not meet the steps during the operation, please turn off the power and try again),Note: Power off and restart, wait for the indicator light to finish fing before operating.Action explanation: s-locking (pre once to open, pre again to close)Action explanation: jog (click and turn on and off automatically after about 0.5 seconds),Action explanation: Pre the lock (pre and hold it, release it and close it)Action explanation: only open (this key can only be opened, cannot be closed)Action explanation: only close (this key can only be closed, not open)Action explanation: interlock (this function needs to be set on the APP)Action explanation: Timing (this function needs to be set on the APP)Action explanation: delay (this function needs to be set on the APP)The circuit board setting on setting method supports remote control and 433mhz remote control as follows:(Learning s-locking) Quickly pre the "Setting" on 5 times, relay 1 fes, (click the setting on to change the learningrelay number), at this time, long pre a key on the remote control to learn a key, you can continue to pre all the keys, after the operation, you need to power off and restart;Interlock setting instructions: (requires Tuya APP setting)●Input 2 on the top and 2 on the bottom, which means 1.2. Interlock●Input 3 on the top and 3 on the bottom, which means 1.2.3 interlock●Input 10 on the top and 10 on the bottom, which means interlocking 1.2.3.4.5.6.7.8.9.10●Input 4 on the top and 2 on the bottom, which means 1.2. Interlock, 3.4. Interlock●Input 8 at the top and 2 at the bottom, which means 1-2 interlock, 3-4 interlock, 5-6 interlock, 7-8 interlock●Input 10 at the top and 5 at the bottom, which means 1.2.3.4.5 interlock, 6.7.8.9.10. interlock●Enter 0 above and 0 below, indicating no interlock【Jog setting】Tuya APP setting is required, and the joing time range is 1-999999 milliseconds.Jog setting instructions:● number input 1, the current jog time of 1 will be displayed below, and the jog time can be changed such as 500 milliseconds.● number input 2, the current jog time of 2 will be displayed below, and the jog time can be changed such as 500 milliseconds.●Joing time input 0 means this does not jog, set other s by ogy.485 bus (only with 485 function)[Restore factory settings] Pre and hold "Settings" for 10 seconds, let go when the indicator light fes quickly, and it's done.

[4G remote] (basic function) NB-IOT IoT 4G remote relay module

This version has a built-in 4G network module, which requires a SIM card that can acce the network, to get rid of the problem that the WIFI version needs a router to nsfer to the network. As long as there is a 4G signal and the SIM card is in the network state, the module can be remotely controlled to achieve outdoor and remote Such as user equipment control requirements in ps without WIFI.

Device network ffic consumption: 15MB/month

The product power supply is divided into DC7-27V power supply version and AV90-220V power supply version according to different models.

Download "Tuya Smart" from the market, install and register, power off the module and restart it, open the APP, and click the + sign in the upper right corner to add devices.

【Remote control】Only supported if you have purchased a remote control) (If there is a f that does not meet the steps during the operation, please turn off the power and try again),

Note: Power off and restart, wait for the indicator light to finish fing before operating.

Action explanation: s-locking (pre once to open, pre again to close)

Action explanation: jog (click and turn on and off automatically after about 0.5 seconds),

Action explanation: Pre the lock (pre and hold it, release it and close it)

Action explanation: only open (this key can only be opened, cannot be closed)

Action explanation: only close (this key can only be closed, not open)

Action explanation: interlock (this function needs to be set on the APP)

Action explanation: Timing (this function needs to be set on the APP)

Action explanation: delay (this function needs to be set on the APP)

The circuit board setting on setting method supports remote control and 433mhz remote control as follows:

(Learning s-locking) Quickly pre the "Setting" on 5 times, relay 1 fes, (click the setting on to change the learning

relay number), at this time, long pre a key on the remote control to learn a key, you can continue to pre all the keys, after the operation, you need to power off and restart;

(Learn to move) Quickly pre the "Setting" on 6 times, the relay 1 will f, (click the first on to change the setting to learn

dimensional electric number). At this time, pre and hold 1 key of the remote control to learn 1 key, you can continue to pre all the keys, and you need to power off and restart after the operation;

(Learn to pre the lock) Quickly pre the "Setting" on 7 times, the relay 1 will f internally, (click the Setting on to change the learning

relay number), at this time, long pre a key on the remote control to learn a key, you can continue to pre all the keys, after the operation, you need to power off and restart;

(Study is fully open) Quickly pre the "Settings" on 8 times, and relays 1 and 2 will f at the same time. At this time, the learning of one key of the long-control remote control is fully open and completed;

(Learning all off) Quickly pre the "Setting" on 9 times, relays 1, 2, and 3 will f at the same time, at this time, long-control the 1 key of the remote control to learn all off, and it is completed;

(Learning only open) Quickly pre the "Setting" on 8 times, relay 1 and 2 f at the same time, pre the "Setting" on once, and relay 1 fes (continue to click the setting on to change the relay number to be learned) At this time, long pre 1 key learning of the remote control is completed;

(Learning only off) Quickly pre the "Setting" on 9 times, and Weiwei Electric 1, 2, and 3 will f at the same time. ), at this time long pre 1 key on the remote control to complete the learning;

(Single key control multe s) For example: 1 on on the remote control controls relays 2, 3, 8 at the same time: quickly pre the "Setting" on 5 times, relay 1 fes, pre the "Setting" on once, relay 2 fes , quickly pre the "Setting" on 3 times, relay 2 and 3 f at the same time, quickly pre the "Setting" on 8 times,

The 2, 3, and 8 of Wei Electric f at the same time. At this time, pre and hold the on 1 of the remote control until the relay light changes, then let go, turn off the power and turn it on again, and it is completed.

Interlock setting instructions: (requires Tuya APP setting)

●Input 2 on the top and 2 on the bottom, which means 1.2. Interlock

●Input 3 on the top and 3 on the bottom, which means 1.2.3 interlock

●Input 10 on the top and 10 on the bottom, which means interlocking 1.2.3.4.5.6.7.8.9.10

●Input 4 on the top and 2 on the bottom, which means 1.2. Interlock, 3.4. Interlock

●Input 8 at the top and 2 at the bottom, which means 1-2 interlock, 3-4 interlock, 5-6 interlock, 7-8 interlock

●Input 10 at the top and 5 at the bottom, which means 1.2.3.4.5 interlock, 6.7.8.9.10. interlock

●Enter 0 above and 0 below, indicating no interlock

【Jog settings】

Tuya APP setting is required, the jog time range is 1-999999 milliseconds.

Jog setting instructions:

●Input 1 for the number, the current jog time of 1 will be displayed below, and the jog time can be changed such as 500 milliseconds.

● number input 2, the current jog time of 2 will be displayed below, and the jog time can be changed such as 500 milliseconds.

●Joing time input 0 means this does not jog, set other s by ogy.

485 bus (only with 485 function)

[Restore factory settings] Pre and hold "Settings" for 10 seconds, let go when the indicator light fes quickly, and it's done.