Specification:Color: RedSize: 30*3.5*2cm/13.78*1.38*0.79inInstructions for use:1. When in use, take out the warning plate of the faulty car from the packing box, hold the bottom with your hand, and open the brackets on both sides of the bottom. P the open sign on the ground, pull out the left and right reflector, and insert the bolt on the left reflector into the opening slot at the bottom of the right reflector.2. The reflective surface of the open fault warning board is pd toward the vehicle behind the faulty vehicle. The vertical angle of the sign is 5 inches on the left side of the vertical surface of the vehicle, and the public road is pd 30 to 100 meters behind the faulty vehicle. The highway was pd 100 meters behind the broken car.3. When you stop using it, pull the left and right reflector and the supporting foot in the opposite order of opening, and then put it into the package. When collecting signs, pay attention to protect the red reflective surface and fluorescent surface to avoid scratches. When the left and right reflector is connected and disconnected, it should be pushed and pulled athe groove direction so as not to damage the pull plate.Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.
1 X Car Warning Tripod