TPA3116D2 Bluetooth 5.0 HighPower 2.0 Digital Audio Amplifier Board

1. This is a DC12-24V single power supply, with TI's TPA3116D2 high-performance digital power amplifier chip as the core, which can support 50W (left channel) + 50W (right channel) dual-channel output.
2. Support bluetooth audio receiver, with external audio input interface, bass, midrange, treble three-tone potentiometer, function control switch/volume adjustment potentiometer.
3. Wide working voltage, power saving design, efficiency up to 90%. You can use a good switching power supply, a laptop switching power supply, a charging bottle or a car power supply, etc.
4. The board is a finished board that has been soldered and tested. Connect the speakers as shown, connect the appropriate power source, connect a Bluetooth audio device, or connect the correct audio input.
5. Power on: Default bluetooth mode, waiting for bluetooth audio device to connect. Source input player: Bluetooth disconnected state, press the volume potentiometer switch, switch to source input mode

Parameters:
1. Size: 110 x 83 x 25mm
2. Operating voltage range: DC DC12-24V (current 3-4A, for example, the above power supply requires 20-24V/5-6A) If an alternating current (AC) transformer power supply is used, a rectifier filter must be added to the DC power supply, can use. Note that the DC no-load voltage should not exceed 25.5V
3. Bluetooth receiving distance: greater than 8 m, Bluetooth version 5.0, barrier-free, can block the receiving distance, and the Bluetooth performance of the mobile phone itself will also affect the receiving distance.
4. Sound source input sensitivity: 600-800mV; frequency range: 20Hz-20KHz
5. Speaker impedance: 4-8 ohms
6. Output power: Power 12V /8 Ohm Speaker greater than 10W x 2; 12V /4 Ohm greater than 15W x 2; 21V /8 Ohm greater than 30W x 2; 21V /4 Ohm = 50W x 2; 24V/8 Ohm greater than 35W x 2; 24V/4 Ohm greater than 60W x 2
This is based on the above test conditions, the actual test data on the instrument, and the output power is related to the power supply voltage/current, speaker impedance, and the size of the audio input. When the supply voltage/current is sufficient, the supply voltage is usually higher and the relative output power can be made larger. Speakers with different impedances also have different output power. Typically, speakers have less impedance and more power
color:Blue
Material:PCB, metal

Package Contents:
1 x Audio Amplifier Board

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
4758. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !