Touch Thermal Imager Multimeter IR Camera Voltage Ohm

[Battery management]: built-in lithium battery (supporting USB charging), with automatic screen turn off and automatic power off functions.
Thermal imager parameters
Sensor: Uncooled plane
lmage capture frequency:16Hz(ET11S)
Thermal imaging pixel: 24*32(ET11S)
:55°(H)*35°(V)
Emissivity: 0.1-0.99 adjustable
Measuring range:-40~ +300℃(ET11S)
Mode:automatic gain
Temperature measurement error: 0℃:±2℃/±2%; ≤0℃ ±5℃/±5%
Display temperature accuracy:0.1°C/0.1°F
Multimeter parameters
Maximum DC input voltage:1000V
Maximum AC input voltage:750V
Maximum measured resistance:40MΩ
Maximum measuring resistance of capacitance:100uF
Duty cycle measurement range:0.1%-99.9%
Diode measuring range:0V-1.5V
Maximum resistance of on-off detection:30Ω
Counts:
4000 counts,Refreshes:3 times per second (ET11S)
Other parameters
Display screen: 2.8 inches 320*480
touch screen: Resistive touch screen
USB interface: TYPE-C
Storage Capacity: 3.5MB
Image Format: BMP
Battery: Built-in Lithium battery
Storage temperature: -20~60℃(-4~140℉)
Working temperature: 0-50℃(32-122℉)
Working humidity: Less than 85%RH(non condensing)
Colour:red
Material:plastic

Package Contents:
1set x Multimeter

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.