TMC2100 V1.3 Stepper Motor Driver + Mute Stepstick Smoother Set with Screwdriver for 3D Printer,Default NO5246

Decription:

Drive current algorithm: i = Vref * 1.9/2.5, the default Vref is about 0.65v, so the default current is 0.5A, the maximum current is 1A!

Vref measures Gnd and the voltage at the middle of the potentiometer.

Do not connect the motor when measuring voltage, otherwise it is easy to burn the driver.

The power should be turned on when measuring the voltage. Do not connect the USB power supply only.

Please pay special attention to directions.

Usage:

1. When using on Ramps 1.4 or MKS Gen, please remove the three jumper caps under the socket

2, pay attention to the direction

3, heat sink directly attached to the PCB

4. The motor direction is the opposite of 4988 and 8825. If you want to directly replace the 4988, adjust the firmware or adjust the motor connection.

We confidently assure you'll be satisfied with what you get.However, If  there's a chance that you are not satisfied with our goods or something else, please let us know before leaving us a Negative feedback. We will try our best for 100% customer satisfaction. Your 5-Star Positive Feedback is much appreciated to us, and your satisfaction is our greatest motivation to move forward.Welcome to Shop Here! Want more Items? Please come & visit our SHOP.

*Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 5 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).Your satisfaction is our first priority.

*If you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.