T6 Upgrade Xm-l2 Led Glaring Headlamp Telescopic Zoom Charging Long Shot Waterproof V9 Fishing Headlight

[Product Model]: TM-051
[Lamp Bead Model]: Cree XML-T6
[Lens Material]: Optical Convex Mirror
[Working Gear]: 3 Gears
[Applicable Battery]: 2*18650
[Brightness]: 1000 Lumens
[Product Material]: Aluminum Alloy
[Operating Voltage]: 3.7V
[Color Temperature of Light Source]: 6000K
[Product Color]: Black
[Can Direct Charging]: Yes
[Focus Or Not]: Yes, Telescopic Focus
[Product Weight]: 185G
[Product Features]]:
1. Lamp Beads: Cree XML-T6 Lamp Beads, with a Maximum Brightness of 1000 Lumens and a Service Life of 100,000 Hours;
2. Eagle Eye Convex Lens: Acrylic Eagle Eye Convex Lens Pieces, Which Makes the Light More Focused and Remote, Aluminum Attack Head Protects the Lens from Wear;
3.DC Charging Hole: Head Charging Hole, Which Can Only Be Charged Quickly by Connecting the Power Supply to Prolong the Battery Life;
4. Built-in Lithium Battery: Built-in Rechargeable Large Capacity Lithium Battery, Can Be Directly Charged without Disassembly;
5. High Quality Sunrei: Elastic Light Band Design, Which Can Adjust the Appropriate Size According to the Size of Its Head;
6. Telescopic Focusing: Head Telescopic Focusing Design, Freely Adjust Astigmatism-Spotlight Conversion, Easily Cope with Various Environments;
7. Angle Adjustment: The Head Can Adjust the Angle up and down According to Its Own Needs, Which Is Easy to Operate, Convenient to Use and Convenient to Work Lighting;
8. Three Kinds of Waterproof Switches Are Optional: Rubber Non-Slip Waterproof Switch, Soft Material, Comfortable Hand Feeling, Light Touch Change Three Gears: Strong-Weak-Flash.

1. Instructions for Use of the Switch
1. the Battery Is the Positive Pole Facing inside (the Side of the Lamp Holder), and the Negative Pole Facing outside (the Tail).
2. the Switch Is at the Tail, the Switch Function Bearing Switch Is the Switch Function, and the Light Switch Is the Dimming Function.
II. Circuit Board Instructions
1. Our Store Torch Adopts Advanced Constant Voltage and Constant Current Technology, Which Can Effectively Solve the Requirements of LED Torch for Constant Voltage and Constant Current.
2. Special Tips: A. Do Not Use It over Pressure, and the Voltage Should Not Exceed 4.2V B. The Battery Is Facing Forward, Do Not Set It in Reverse, Otherwise It Will Burn Plate C. Pay Attention to Controlling the Temperature Change of Torch to Ensure Heat Dissipation D. Do Not Open the Circuit Board for Non-Professionals.
3. Warranty Description: No Longer Covered by Warranty after Opening Or Handling the Circuit Board.
III. Lithium Battery Instructions
1. Features of Lithium Battery: the Charging Method of Lithium Battery Is Completely Different from That of Mobile Phone Battery; Lithium Battery Has No Memory, and Can Be Charged at Any Time, and Should Not Be Overcharged Or Overdischarged.
2. Special Tips: Use a "Three-Proof" Charger with Anti-Overcharge, Anti-Reverse Connection, and Anti-Short Circuit;
3. If You Do Not Use the Battery for a Long Time, You Should Fully Store the Power, and Charge and Discharge It Normally in about Three One Months;
IV. Instructions for Torch
1. When Using Torch, Choose According to the Requirements of Torch for Voltage and Battery. Do Not Use It Indiscriminately to Prevent the Circuit Board from Being Burnt out. Do Not Use Batteries of Different Models and Voltages at the Same Time.
2. in Use, When the Brightness of Torch Changes Significantly, Turn off Torch to Prevent Battery Overdischarge.
3. Heat Dissipation Skills: Torch Ensure Heat Dissipation during Use. It Is Strongly Required That When the Battery Is Fully Charged, It Is Better to Use the Second Gear First, Which Can Extend the Product Life of Torch Lamp Holder and Battery! Torch Light Cannot Be Directed Directly into People's Eyes, Which Is Super Bright and Dazzling, So as Not to Affect Eyesight, Especially Children.
V. Troubleshooting
1. Check the Battery: Make Sure That the Battery Has Electricity and the Battery Is Installed in the Correct Direction. Batteries of Different Brands Cannot Be Used. New and Old Batteries Cannot Be Mixed.
2. Check Tail Hood: Make Sure That the Switch Is Tightened and in Good Contact, Ensure That the Tail Hood Copper Cylinder Is in Good Contact with the Tail Hood Pressure Ring Metal Sheet, and Pay Attention to Whether the Lamp Holder Is Loose.

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.