Swivel Neck Thermostat Housing V2 for K-Series K20 K24 radiator hose k swap YX02914

Swivel Neck Thermostat Housing V2 for K-Series K20 K24 radiator hose k swap YX02914
Swivel Neck Thermostat Housing V2 for K-Series K20 K24 radiator hose k swap
The housing swivels, allowing you to position the water outlet angle before it is tightened down.
The provided custom made fitting is the same size as the oem rad hose on one end, and is threaded for an AN fitting on the other
end.
This allows you to use whatever size fitting you need for custom s. If you want to use braided hose with AN fittings,
this housing will bolt on easily and with the right adapter threaded in, you'll be all set.
The swivel neck comes pre-assembled with a quty Stant thermostat (180 deg °F) which is held in p with a 'C' clip.
Adjustable, set the rad hose at any angle.
Fan switch port for engine swaps.
Easily deletes heater core hoses on race cars.
Threaded water outlet for custom setups.
The kit uses a standard size thermostat that you can easily rep with anything in the (160-195 °F) degree range.

Application:
For K Series K20 K20a K20a2 K20z1 K24A K24Z.(Like RSX ,TSX , Accord , Civic , CR-V.)
Dimensions & Material & Color:
The housing has four ports in the body, one for your fan switch, a 1/8 NPT port for gauges etc. and also 2x 3/8 NPT ports our optional recirculation fitting. 2 NPT plugs are
included in case the ports remain unused.
Made of high quty Aluminium.
Color: black
Package Included:
1x Cooling Components Swivel Neck Thermostat. (100% Never Used Or Installed)

NOTE:

Communication is the best way to solve the problem. If you have any probl after purchasing, please contact us in time, before opening return or case.

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.