Suitable for 2020 New Toyota RAV4 Taillight Eyebrow ABS Decoration Frame Sequins Rongfang Exterior Modification G

---- Product Parameters----

[Applicable Vehicle Model]]20 Toyota RAV4

[Product Name]]Taillight

[Product Color]]Matt Black/Carbon Fiber/Electroplating

[Product Material]]Abs Plastic

[Product Specifications]]4 Pcs/set

[Installation Method]]Paste (with 3M Glue on the Back. If the Temperature Is Lower than 15 Degrees, You Must Heat It and Paste It!) Easy Installation and Easy Operation

[Product Features]]

1. High-Level Craft ABS Electroplating Exquisite Production, Very Beautiful, Exquisite and Gorgeous, Never Rust, the Symbol of Luxury Car Makes Your Car More Eye-Catching!
2, Car Mold Manufacturing, the Appearance of Bright and Clean, Simple Installation, Protection More Comprehensive, but Also a Fashion Decorative Element.
3. It Fits the Radian Design of the Original Car and Is Completely Matched with the Car Itself. the Exquisite and Gorgeous Appearance Shows the Unique Charm of Your Car, Which Is a Necessary Basic Ornament for Car Friends.

[Instructions]]

1. Surface Cleaning. The Paste Surface Must Be Kept Absolutely Clean and Dry. Generally, Cloth without Fiber Shedding Can Be Dipped in 50% Alcohol, Isopropyl Alcohol, Acetone Or Toluene Solution for Cleaning, the Surface Cleaned by Solvent Shall Not Be Pasted until the Solvent Is Thoroughly Used.

2. Paste the Product. before Pasting the Product, Adjust the Product at the Required Installation Position. after Confirming the Installation Position of the Product, Tear off the Red Film and Paste It. Avoid Contact between Fingers and the Adhesive Surface during Operation, and Press the Product with Force after Pasting to Ensure Full Contact with the Adhesive Surface HR Wet.

[Installation Method]]
1. Find the Location That Matches Your Car
2. Clean and Wipe Its Position Thoroughly
3. Tear off the Adhesive Paper behind the Body (Air Heater Can Be Used to Properly Heat the Double-Sided Adhesive)
4. Stick on the Good Position and Press Hard for a While.

5. It Is Best That the Product Does Not Touch Water and Large Dust Within 24 Hours after Being Pasted to Achieve the Best Adhesion.

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.