Store Fish Smart Electric Coffee Kettle Gooseneck 600-800ml 220V F Heat Temperature Control Pot For Kitchen

Please pay attention! All temperature control kettle plugs are randomly sent with UK and Chinese versions of plugs! If you have special needs, please communicate with customer service.

The Chinese plug version of the kettle will be randomly given a UK plug, as shown in the figure:Randomly send color

Default Chinese standard plug:

UK standard plug

The cap design of 600ML is different from that of 800ML, please pay attention!

800ML-1500W-220V-50HZ600ML-1000W-220V-50HZ

The following is a picture display of 800ML

Specification

01. Product Name: Electric Pour-over kettle Standard Version02. Temperature error: plus or minus 2℃ (depending on the different atmosphere in different regions)03. Range of Hold Temperature: 45℃ - 98℃04. Storage temperature: -10℃ to 55℃05. Use temperature: -10℃ to 60℃06. on control: capacitive touch on, no need to pre hard and capacitive sliding touch bar07. Auxiliary notification: built-in buzzer and vibration motor08. Power: AC220 -240V~ Heating power: 1500W Capacity :700mL control and data power doesn’t exceed 5W

Note:

1. Do not dry boil the kettle when there is no water.2. Please turn off the power and pull out the plug when not using the product.3. Do not add more than the mark of the highest water level, to avoid liquid overflow into the connector.4. Do not immerse the bottom of the kettle and the control base in water or other liquids.

Q&A:

Q: Why is the actual temperature displayed higher than the preset temperature?A: It is recommended to add at least 500ML of water into the pot. Because the heating power of the thermostat is 1000W\1500W, too little water will cause the temperature of the thermostat to rise rapidly after starting heating.