The Stitch Gun has an efficient and easy-to-use design, a built-in storage box, and a new upgrade to reduce the possibility of fabric getting stuck.

Install the needle

Step 1: Pull the trigger and do not release.

Step 2: Gently insert the row of fasteners (T letter ports) into the T slots located on the top of the marking gun until you hear a click.

Step 3: Release the trigger and gently pull on the attachment to ensure the attachment is locked in place. A properly installed attachment is secured.

Step 4: To verify that the fastener is properly assembled, pull the trigger and observe the attachment through the needle. If the fastener will not feed or eject, remove the needle and gently pull on the attachment to remove the clip. Repeat steps 1, 2, and 3 to insert and replace the needle.

Install the ature fasteners

Step 1: Unlock the needle by turning the white needle lock from the left side (9 o'clock) to the right side (3 o'clock).

Step 2: Make sure the needle slot is aligned with the gun slot. The needle slot runs the length of the needle. Insert the needle into the hole in the gun tip as far as it will go.

Step 3: Once the needle is fully inserted, turn the white needle lock back to the 9 o'clock position to lock the needle in place. Resistance means the needle is not inserted correctly. Repeat steps 1, 2, and 3.

Step 4: Confirm that the needle is properly installed and locked in place by pulling the trigger. Always point the gun away from yourself and others.

Easy to use

It is easy to use by aiming at the area that needs suturing and pressing the handle.