Step-down Power Converter Module with Voltage Display LM2596 DC-DC,Default NO5241

Features:

1. Adopted original LM 2596, output short circuit guard, high current 3A.

2. Onboard voltmeter, voltmeter can be self-calibrated, there is no problem of voltmeter inaccuracy.

3. Tap the button to switch the measurement input or output voltage, and the indicator light shows which voltage is being measured, and save the settings, even if it is powered off and then turned on.

4. The voltmeter can be turned off, and it can be easily achieved by tapping the left button when not needed.

5. With terminal block, no soldering iron can be used easily, and retain the wire bond point.

6. Input voltage is 4.0~40V. (The input voltage must be 1.5v higher than the output voltage)

7. Adjustable output voltage range is 1.25V~37V continuously adjustable. (Input voltage must be 1.5V higher than output voltage)

8. Output current 3A, it is recommended to use within 2.0A, high current needs to strengthen heat dissipation.

9. Output power 20W, more than 15W, please strengthen the heat.

10. High conversion efficiency, averaging 88% (efficiency related to input, output voltage, current, voltage difference)

11. With reverse connection guard, reverse connection does not burn

12. With overheat guard and short circuit guard.

Specifications:

Size: 6.1*3.4*12cm

Applications:

Can be applied in battery, power transformer, DIY adjustable power supply, 24V car pen power supply, industrial equipment step-down, 12V to 3.3V, 12V to 5V, 24V to 5V , 24V to 12V, 36V to 24V, etc.

Onboard voltmeter self-calibration method:

1. When the on-board voltmeter displays the output voltage, press and hold the right button for 2 seconds to release, the voltmeter and the output voltage indicator "OUT" flash synchronously. At this time, the output voltage adjustment mode is entered; similarly, the voltmeter is displayed. When inputting the voltage, long press the right button for 2 seconds and then release, the voltmeter and the input voltage indicator "IN" flash synchronously, then enter the input voltage adjustment mode;

2. Tap the right button to increase the voltage by one unit. Tap the left button to lower the voltage by one unit. Since the voltage of one unit is less than 0.1V, you need to press 1-5 times to see the voltmeter. Changed by 0.1V, the specific continuous button press depends on the currently displayed voltage value, the higher the current display voltage, the fewer the number of presses;

3. After the voltage adjustment is completed, long press the right button for 2 seconds and then release, then the voltage calibration mode can be exited, and all parameter settings are automatically powered down.

Note:

This adjustment method allows you to obtain accurate voltage values over the entire voltage range with only one calibration. This function is designed to meet your higher accuracy requirements. Please feel free to use it.

We confidently assure you'll be satisfied with what you get.However, If  there's a chance that you are not satisfied with our goods or something else, please let us know before leaving us a Negative feedback. We will try our best for 100% customer satisfaction. Your 5-Star Positive Feedback is much appreciated to us, and your satisfaction is our greatest motivation to move forward.Welcome to Shop Here! Want more Items? Please come & visit our SHOP.

*Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 5 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).Your satisfaction is our first priority.

*If you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.