STC-3028 SHT2000 Temperature Humidity Controller Home Fridge Thermostat Humidistat Thermometer Hygrometer DC 12V 24V AC 110-220V

SHT2000 Temperature and Humidity Controller Operating Instructions Product Name: Temperature and Humidity Controller    Product Model: SHT2000 Supply voltage: AC 110~230V                                        Power supply frequency: 50/60Hz Temperature range: -20~60°C                                        Humidity range: 0%~100%RH Temperature measurement accuracy: 0.3 °C                 Humidity measurement accuracy: 3% Output Control: Relay Output                                         Output Power: MAX 10A Setting method: Start value stop value (the program automatically determines the working mode is cooling/dehumidifying mode) Heating/cooling mode setting: Setting mode: setting (starting temperature): Pre and hold the ▲ on to start the temperature flashing. Use ▲▼ key to set the starting temperature value. Setting (stop temperature): Pre and hold the ▼ on to stop the temperature flashing. Use ▲▼ to set the stop temperature value. Heating use case: control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again Step 1: heating mode, starting temperature stop temperature Step 2: Pre and hold the ▲ on to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C. Step 3: Pre and hold the ▼ on to stop the temperature flashing. Use ▲▼ to set the stop temperature to 26°C. The setting is completed! Humidification/Dehumidification Mode Settings: Setting (start humidity): Pre and hold △ key to start the humidity value flashing. Set the humidity value by △ ▽ key. Set [Stop Humidity]: Pre and hold △ key to stop the humidity value flashing, and set the humidity to stop by △ ▽ key value. Humidification example: fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification. Setup steps: Step 1: Pre and hold the △ on for 3 seconds to start the humidity value flashing, and set the starting humidity value to 50% RH. Step 2: long pre the ▽ on for 3 seconds to stop the humidity value flashing, set the value to 80% RH, the setting is completed, the on does not operate for 5 seconds, and automatically returns to the normal display state. Dehumidification example: workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification Setup steps: Step 1: Pre and hold the △ on for 3 seconds to start the humidity value flashing, and set the starting humidity value to 40% RH. Step 2: Pre and hold the ▽ on for 3 seconds to stop the humidity value flashing, set the value to 70% RH, the setting is completed, the on does not operate for 5 seconds, and automatically returns to the normal display state. Package included: 1Pcs x  AC 110V-230V 10A SHT2000 LED Digital Humidity Temperature Controller Thermostat Humidistat Therometer Hygrometer Water Heater

STC-3028

Feature: Be able to control temperature and humidity at the same time. Be able to connect with humidifier and dehumidifier equment at the same time. Be able to connect with refrigeration/ heating and humidifier/dehumidifier equment at the same time. Heating/Cooling function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity Control. Supporting Temp and Humidity Calibration [Dual Display Window] Be able to display measured temperature/humidity and set temp/humidity at the same time Specification: Model: STC-3028 Input voltage: AC110~220V± 10%, DC24V, DC12V Measuring temperature range: -20°～+80° Measuring humidity range: 00%RH～+100%RH Accuracy: ±1°, 0.1%RH Relay output contact capacity: 10A/240VAC Shell material: PC + ABS fireproof r length: 1m Set startup temperature(humidity): Pre the "up" on once to display the starting temperature(humidity). Long pre the "up" on for about 3 seconds,The required temperature(humidity) can be set by the up and down keys Set stop temperature(humidity): Pre the "down"on once to display the stop temperature(humidity). Long pre the on for about 3 seconds and the stop temperature(humidity) number flashes. The required temperature(humidity) can be set by the up and down keys Temperature/humidity correction: Pre "up"  and "down" on at the same time. Package included: 1 X Temperature  Humidity Controller STC-3029 Features: Reliable performance and high work efficiency Priority material, precise sensing A variety of voltages are available for a wide range of applications Fast response and good interchangeability Widely used in water-saving irrigation, greenhouses, flowers and vegetables, plant cultivation and other fields Product Name: Soil Controller Model: STC-3029 Supply voltage: DC12V/DC24V/AC110-220V optional Relay: 10A Output power: 120W/240W/1500W Humidity range: 0-100%RH Control accuracy: 0.1%RH r length: default 1 meter Product size: 75*34.5*85mm Installation size: 71*29mm Shping list: Humidity Controller X1

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.