STC-1000 LED Digital Temperature Controller Thermostat for Incubator Refrigerator Thermoregulator Relay Heating Cooling 220V

STC-1000 LED Digital Temperature Controller Thermostat for Incubator Refrigerator Thermoregulator Relay Heating Cooling 220V

• I am an international seller

Our shop sells the most popular 3C consumer electronics products,such as mobile phone accessories,computer accessories,game peripherals,smart wearables,and follow the most popular fashion trends. If you like our products,please follow us,become our follower and fan.We will provide you with the most popular products to satisfy your fashion shopping experience.Theory : Temperature ControllerBrand Name : DIZAINLIFE : Mainland ChinaFeatures:100% and high qualitymodle: STC-1000Switch the modes between cool and heat; Control temperature by setting the temperature setting value and the difference value; Temperature calibration; Refrigerating control output delay protection; Alarm when temperature exceeds temperature limit or when sensor error.Technical :?1.Temperature measuring range: -50 ° C ~ 99 ° C2.Resolution: 0.1 ° C;3.Accuracy:+- 1° C (-50 ° C ~ 70 ° C);4.Sensor error delay: 1 minute5.Power supply:?AC 110-220V 50/60Hz,? DC 12V, DC 24V, DC12-72V( Choose power supply when you place order?) ;6.Power consumption: = temperature set value + difference value, and the refrigerating relay is connected; If the “Cool” indicator light flashes, it indicates the refrigerating equipment is under compressor delay protect status; when the measuring temperature values temperature set value, the Cool indicator light on, and refrigerating relay disconnects.System starts heating when the measuring temperature value = temperature set value, the "Heat" indicator light is off, and the heat relay disconnects.Error/Alarm descriptionAlarm when sensor error: Controller activate the sensor error alarm mode when sensor open circuit or short circuit, all the?running status is closed off with the buzzer alarms, and the nixie tube displays “EE”,Press any key can cancel alarm sound,?system back to display the normal temperature when the error and the fault is cleared.Alarm when the measuring temperature exceeds temperature measuring range:Controller activates the error alarm function?when the measuring temperature exceeds the temperature measuring range, all the running status is closed off with the buzzer?alarms, and the nixie tube displays “HH”,Press any key can cancel alarm sound, system back to display the normal working mode when the temperature restore to normal measuring range.?Safety RegulationsDanger:1.Strictly distinguish the sensor down-lead, power wire and output relay interface from one another, and prohibit wrongconnections or overloading the relay.2.Dangers: Prohibit connecting the wire terminals without electricity cut-off.Warning:Prohibit using the machine under the environment of over damp, high temp., strong electromagnetism interference orstrong corrosion.Notice:1.The power supply should conform to the voltage value indicated in the instruction.2.To avoid the interference, the sensor down-lead and power wire should be kept a distance.