Soleeeanre wireless headphones earphone Bluetooth stereo sport headset gamer hearing aid with mic handfre

Parameters:

1.Bluetooth-compatible Transmission Range: 10 Meters

2. Capacity: 1200 Mah

3.headphone battery capacity: 40 mAh

4.Working Time: About 2-5 hours

5.Charging Time: About 1-2 hours

6.Stand Time: About 150 hours

7.Material: Plastics

8.Charging interface: micro

9.Charging voltage: DC5V/1A

10.Operation Mode: Touch

11.Compatible: Android, iOS, Microsoft, Tablet, 99% of the phones with Bluetooth-compatible.

Features:

1. Full Frequency Moving Iron

2. LED Digital Display, Real-Time Power Display, Power Level At A Glance

3. The Left And Right Ears Can Be Used Separately And Can Be Independently Matched With Bluetooth-compatible Devices

4. Smart Buttons Design, Easy To Operate

5. Bluetooth-compatible 5.0, Low Power Consumption

6. charging of mobile phone

Instructions for use :

Turn off your Bluetooth-compatible device on the phone and both left right earphones first.

And then, Long touch for 3-5 seconds to turn on, the headphone light flashes to indicate that it is turned on, (release the hand without touching the headphones), wait for the left and right headphones to be paired, one of them stops flashing means the left and right headphones are paired successfully, and then connect to the Bluetooth-compatible of the mobile phone (if Your phone's Bluetooth-compatible device has been connected to the headset before, please disconnect it first)

Note:

When purchasing the Bluetooth-compatible headset, please read the following instructions: Due to long-term transportation, the power of the earphone will be exhausted. You will not be able to use the headset when you receive the package. It may be powered off. The first thing to do is to charge the headset box for 30 minutes. Very ant. Thank you!

Headset Configuration

Product model: YD03

Version: 5.3

Running time: about 5 hours

Call time: approximately 5 hours

Headphone capacity: 50mAh/3. 7V

Charging time: about 1 hour

Effective distance: 10 m

Hom: copper ring 8mm

Charging bin configuration parameters

Battery capacity: 1200mAh/3.7V

Charging time: about 1 hours

Input voltage: 5V/500mAh

Wearing a way

Open the cover of the charging bin, take out the earphone of the right ear, gently put the speaker end of the earphone into the ear canal of the right ear, and then gently sway the earphone not to shake.

Mode of operation

1. The boot

(1) Open the charging chamber, take out the earphone, start the machine automatically, and the earphone breathing light flashes

(2) When the headset is off, touch the touch pad of the headsct for 3 soconds to start the headset

2. To tun it off

(1) Put the earphone back into the charging bin and close the cover. The earphone will be turned off and charged

(2) When the headset is on, touch the touch pad of the headset for 5 seconds to turn it off

Pairs of ears connected

1. Open the cover of the charging compartment, take out the earphone and start it automatically. The earphone breathing light flashes, and enter the automatic team formation state. One of the earphone lights is off, indicating that the team formation is successful

2. Open the device Bluetooth list and search for "YD03".

3. Click "YD03"to connect. If the comnection fails, put the earphone back into the charging bin and cover it, and then repeat the above steps.

4. When both ears leave the normal connection distance with the device at the same time, the headset will enter the bluetooth headset connection state. If thecomnection is not successful within 5 minutes, the headset will automatically shut down.

5. After the headset is turned on and before the mobile phone is connected, three clicks on either side of both ears will automatically switch between. Chinese and English languages

(After the hondset is turnod on and before the mobile phone is connected, three clicks on either side of both ears will automatically switch between Chinose and English Ianguages)

After the device is connected for the first time, the headset will automatically connect to the last pair device when it is restarted time

Binaural touch operation

Play /pause music: Under wusic status, tap the L/R earphane once

Play the previous song: Under music status, tap L earphone 2 times

Play song: Under music status, tap R earphone 2 times

Under music status,3 times tap L earphone volume

Under music status,3 times tap R earphone volume -

Answer the phone: tap the L/R headset

Refuse to answer the call: Long press L/R earphone for 2 seconds

Voice assistant: Long press L/R for 1. 5 seconds

Mode switching; Default: music mode

Tap the 1/r Headset 4 times

to switch: Music Mode -video mode -game mode

Earphone charging: Put the earphone into the charging box to automatically charge, close charging cover, charging indicator light red light, red light off after full

Charging box low power: The single digit of the nixie tube flashes

Charging box charging: The single digit of the digital tube flashes, and it stops when it is full of 100

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.