SO138mini Oscilloscope DIY Kit Mini Digital DSO138 Mini Oscilloscope SMD Parts Pre-soldered Electronic 1MSa/s Learning Set

SO138mini Oscilloscope DIY Kit Mini Digital DSO138 Mini Oscilloscope SMD Parts Pre-soldered Electronic 1MSa/s Learning Set

DSO138 Mini has similar performance as DSO138 but come with significant improvements in power supply and mechanical structure. Unlike DSO138, its power supply was greatly simplified with much le component counts. DSO138mini makes MCU and LCD stay in one PCB to avoid problematic pin-header connections that was used in DSO138. This not only increases product reliability but also allows the main board to become a flexible general purpose controller. The overall size of DSO138mini is only 2/3 of DSO138 so it is much more suitable for hand-held operation.

2.4-inch color TFT LCD with 320*240 resolution displays s clearly.Make MCU and LCD stay in one PCB to avoid problematic pin-header connections.Overall size of DSO138mini is only 2/3 of DSO138 so it is much more suitable for hand-held operation.Improvements in power supply and mechanical structure, it can run on USB or a single cell 3.7V Li-ion battery.Can be connected with computer for data transmiion.DSO138mini has improvements in firmware, too.Its trigger can work reliably under 10us and 20us timebase settings.With Auto/Normal/Single trigger modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay).Can freeze at any time waveform display (HOLD function).Waveform storage function: will not lose the waveform after power off.Short-circuit and open-circuit : can help the user find out the error.TFT controller recognition function.All SMD parts has been soldered and the MCU has been programmed.

Note:The SMD parts in this DIY kit has been soldered, you just need to solder other parts by yours.

Material: PCBNumber of : 1Analog Bandwidth: 0-200KHzSensitivity Range: 10mV/Div - 5V/DivSensitivity Error: