SmartDevil Full Cover Glue UV Tempered Glass for OnePlus 11 Smartphone Screen Protector for Oneplus 10 9 Pro Sensitive HD Clear WAR

 

Prohibit installation under sunlight !!!

Notice: If you buy this UV Tempered Glass at first time,please choose the one with tool.

Note: Please use the black sticker to seal the receiver and button to prevent glue leakage.

How to install

1. Turn off your phone, Paste the non-slip mat on the back of the phone2. Wipe the screen evenly with leveling wipes3. Wipe again with ①wet wipes4. Dry the screen with ②dry wipes until there is no water mark5. Remove dust from the screen with ③dust absorber6. Install the frame from top to bottom, keep balance on all sides, make sure the frame fits your phone perfectly7. Set up a bracket at the bottom of the frame and make sure to push it to the end8. Important step: The level must be balanced on all sides(The bubble of the level is between the scale lines on both sides)9. Be sure to place absorbent cotton around the frame. A total of 5 pieces of absorbent cotton, up and down, left and right, and speakers are required(Otherwise, the spilled glue may damage your phone)10. Drop the glue on the red circle (As shown in the video)11. Rotate the white cover for 4 turns and remove it. Hold the middle of tube in your left hand, make its opening is facing down.12. Make the tube 5mm above the screen13. Rotate the small cap of the tube, and the liquid glue will come out automatically. Make the liquid glue on the screen in a circle14. Tear off the isolation film15. Place the screen protector stays close to the top of the frame16. The bottom of the screen protector is placed on the bracket17. Take the handle of the bracket and move it out slowly, so that the screen protector can be put down slowly.18. The glue will spread evenly on the whole screen.

Do not press on the glass when the glue is not dry!!!

Remove the absorbent cotton before dry the glue!!!

19. Connect the power and turn on the UV light20. Slide left and right until the light goes out automatically, so that it shines evenly on the screen to dry the glue21. Press the screen gently with your fingers and remove the install frame vertically upwards22. After removing the frame, wipe the glue that spills around the screen23. Turn on the UV light to illuminate both sides of the curved screen24. Finished

The Package List

- Tempered Film, Patent film artifact, UV optical lamp, Optical glue, Non-slip mat, Absorbent botton, Carbon fiber back film, Instruction manual,

   Film sticking kit

About shipping
Shipping and Packaging All items will be double checked and well packed before sending.Items will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.