smart car Wireless immobilizer Anti-Hi Anti-theft Device ligent Circuit e Control Access Car Immobilizer System

Points:1. Anti-theft Unique Design:The e control of the Car immobilizer system is and the main unit is even smaller. It adopts a new type of micro-electric technology, which brings you more safety.2. Prevent Car Theft:Car security system alarm e control with automatic induction function, no need to operate, you can hide the e control in your wallet or other hid locations.3. Multi e Control Modes: Even a novice can handle it easily. The Wirele immobilizer for a car has a manual mode which is to pre the e control every time or immediately after turning it on. In automatic mode, just bring the e control.4. Led Indication Function:Car Alarm immobilizer When receiving a signal from the e control, it fes once for 1 second, and when no signal is received, it fes 2 times per second for 11-20 seconds.5. Tools-:Car immobilizer anti-theft installation is very simple and can be DIYed completely. Just unplug the oil fuse in the engine compartment of the car, and plug in our main unit directly to rep it to complete the installation.

Features：

1. The main unit of the Car immobilizer system is even smaller, the e control is ,2.The new micro-electric technology brings you more safety.

3.The e control of the Car security system alarm has an automatic sensing function,

Specification:1. Unit working voltage: 12V±3V2.Unit quiescent current: ≤12mA3.Unit control current: ≤30A4.e control operating current: ≤3~8mA5.e control standby current: ≤1uA

6.e control battery specification: CR20-32

How to use the e control:Please keep the e control alone, do not mix it with the car keys to increase the diffity of grabbing. learning: Pre the host computer learning code switch to let go, and immediately pre the e control on, the relay in the host will beep 3 times to indicate that the code learning is succeful, and the method for learning the second e control is the same as above. Up to 2 can be learned. The code has been learned well when leaving the factory, and there is no need to repeat the operation.

How to install:

First, open the fuse box, find the oil fuse and pu-ll it out, then rep it with the red wire plug, Keep the fuse in a safe p, fix the main unit with a tie and cover the fuse box.

NOTICE:

When not using the system, turn the e off for extended battery life, This product is not a waterproof design.

Product List1 x Unit with wire (fuse=15A)2 x r Remomte1 x User manual in English