SH FROM russia RU 2000W Industrial Electric Hot Air Thermoregulator Heat s LCD Display Shrink Wrapping Thermal

Note: there are some color differences between the product physical drawing and the picture,

Product feature

one Grille air outlet design, uniform air supply, strong and powerful

two Double heating wire, overload protection, rapid temperature rise, not afraid of overload

three PP + GF30 body shell, more heat insulation, anti falling and anti scratching

four Two speed wind speed regulating switch and steple temperature regulating knob are designed to adjust the temperature according to their own need

five 365 high power pure copper motor, uniform and stable operation and longer service life

6. Blue LED display, HD display, anti dazzle

Precautions for safe operation

1. Please connect the power supply according to the voltage indicated on the tool.

2. When using tools at heights, be sure to hold the tools tightly at any time.

3. Do not place the tool before it stops completely.

Safety precautions of hot air

1. Do not use the hot air as a hair dryer.

2. Do not directly point the hot air blower at people or animals.

3. Do not use near inflammables or flammable gases.

4. Do not block or cover the hot gas inlet and outlet.

5. Do not touch the nozzle when the hot air is used or just after use. The handle of the hot air must be protected

Keep dry.

6. The hot air can be stored only after it is completely cooled.

Maintenance and repair

Do not use turpentine, paint mixture, gasoline or the same for cleaning.

1. When stopping the operation, please slowly lower the temperature and blow out all the hot air in the air duct before turning it off

Turn off the switch, and erect the hot air duct vertically on the flat worktable.

2. When storing the hot air duct, please confirm that the hot air duct has been completely cooled.

3. Regularly remove the dirt aculated at the air inlet and keep the air inlet and outlet clean.

4. Check all extended insulated wires. If damaged, please replace them immediately. Do not use damaged insulated wire

Edge wire, because it may be injured by electric shock if touched.

5. All maintenance must go through an authorized service center or other qualified service organization to ensure security

Integrity and reliability.

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.