SA6 6GHz Spectrum SA6 Signal

The SA6 is a simple portable spectrum and signal source designed to display the spectrum of signals in the frequency range 35 to 6200MHz.
The finds the magnitude and frequency of the components of the process being analyzed. Spectrum s can process signals of all widely used technologies: Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLONASS, etc.
Another ant feature is the additional functionality of the tracking , which makes it possible to measure the frequency response of passive or such as filters or amplifiers. The allows measurement of SWR and return loss modules. This requires an external directional coupler and a calibration measures. SA6 is mainly used for field operations.
The device is , and consumes low energy consumption. It enables service centers and maintenance to perform on-site HF analysis for commissioning and repair work. Additionally, the spectrum is the perfect solution for repair shops and radio amateurs.
For example, you can use the device to: place an external antenna on a base station / do a quick analysis of the RF environment / check the correct operation of a repeater cell.

Display frequency range: 35 - 6200 MHz
Measurement frequency range: 35 - 4500 MHz
Dynamic range in the 35-3000 MHz band: 75 dB
Dynamic range in the 3000-4500 MHz band: 70 dB
Maximum span: 6165 MHz
Bandwidth: 200 kHz, fixed
View the scanning speed of the frequency band above 100MHz: 700MHz/sec
Sweep 100 MHz: less than 0.25 seconds
Noise floor up to 3000 MHz: less than -90dBm
Noise floor 3000-4500 MHz: less than -85dBm
Noise floor 4500-6200 MHz: less than -80dBm
Wave impedance: 50 s
Standing wave ratio in the working frequency range: less than 1.5
Internal attenuator: 0-30 dB
Error at attenuation up to 10 dB: 2 dB
10 to 20 dB attenuation error: 5 dB
20 to 30 dB attenuation error: 8 dB
Tracking output power: -15 to -25 dBm
Accuracy in dynamic range: 2.0 dB
The maximum input power of the attenuator at 0 dB: 10 dBm
Maximum input power when attenuation is 20dB: +20dBm
Maximum input measurement signal: +10 dBm
Maximum input : 25V
Maximum current consumption when running on battery: 450 mA
Maximum current consumption when running from USB: 500 mA (when charging)
Battery: 2500 mAh
Duration time: 3 hours
Battery charging time: ~ 5 hours
Colour:black
Material:metal+plastic

Package Contents:
1 x SA6 Spectrum
2 x SMA-SMA Extension Cable
1 x Data Cable
1 x Resistive stylus
1 x SMA- passed connector

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.