S201B G12 Water Heater Water Flow Sensor Flowmeter 130Lmin Flow Meter

Description:

Interface mode: two heads, 4 points, 20mm, G1/2, one quick connector
Wiring method: red positive letter, black negative, yellow signal output
Working water : less than 1.75MPA
Working voltage: 3-24V
Working current: less than 15mA
Frequency: F=7.5*Q(L/Min) Error: ±2% Voltage: 3.5-24VDC, current cannot exceed 10mA, output 450 pulses after one liter of water
That is, frequency calculation = constant 7.5 * unit flow rate (L / min) * time (seconds)
Flow range: 1-30L/min

Feature:
1, the lowest rated working voltage: DC4.5 5V-24V
2, the maximum working current: 15 mA ( 5V)
3, working voltage range: 5 ~ 18 V
4, load capacity: ≤ 10 mA ( 5V)
5, the use temperature range: ≤ 80 °
6, the use of humidity range: 35% ~ 90% RH (no frosting state)
7, allow : water below 1.75Mpa
8, storage temperature: -25 ~ + 80 °
9, storage humidity: 25% ~ 95% RH

Package included:
1 x S201B G1/2 Water Flow Sensor








a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a