S1A S4B Custom USB 3.0 Male To Female Ul~Thin FPC Flat Ribbon Extension Cable Type A Female To USB A Male Extender Double Angled

FFC Up Down Left Angled Type-A USB 3.0 Extension Ribbon Cable Male To Female Fold 90 Slim Flat Soft Flexible FPC Charge Brushle Gimbal MonitorADT-Link USB 3.0 USB-A to USB-A Flat Cable

Brand name:ADT-LINK

Product name:USB 3.0 flat Cable

Product model:USSseries

Product name:USB3.0 Type-A extension cable

Wire length:3cm-3m (the length can be customized)

Adaptation range:USB3.0 type-A to type-A

nsferspeed:USB 3.0 5G/bps (support 10G/bps high speed within 50cm, 5G/bps within 1 meter)

Current capacity:5V/3A (Measured to support 3A within 50cm, and 1.5A within 1 meter)

Application: , ROCK Pi 4 raspberry Pi microcontroller development board, built-in USB device extension switch use, convenient for brushle head, steering engine head, small s head, SLR head USB power supply and AV nsmiion and so on

Purchase restriction: This product is designed to be connected to built-in USB devices. It is not suitable for general external use,It does not support OTG external use

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the and the connector. For the wire length, please refer to the 5cm black arrow in the figure below.

Product advantages:Material advantages: use German patented ed wire, use high quality gold-plated connectors, high frequency support HDMI 2.0 stable nsfer. uses high-quality low-resistance high-quality materials, workmanship precision, uses high TG sheet, copper thickne is thickened to 1oz; connector gold-plated conductive performance, can reduce the black screen blue screen sp caused by increased oxidation rust resistance Flower screen problem.Design advantages:differential signal without via design, no CAF micro short circuit phenomenon, high speed signal data nsmiion without parasitic capacitance and parasitic inductance signal attenuation interference problem, power circuit enhanced wiring design, board miniaturization design, can reduce mechanism interference , no card hardware, product installation is easy.Production advantage:Our factory direct s, product customized production, welding at the metal welding point during production. And put on the heat-shrinkable tube protection, the product is firm and reliable, there will be no problem of disconnection and disconnection. The product works well, stable and reliable.

Summary of technical iues:

1. Can wires and connectors be split?

No, in order to purify the signal nsmiion and avoid the accident of wire falling off, our wire and connectors is and protected by the heat shrinkable tube sleeve, so the product can not be separated.

2. Cable thickne? Can it be bent?

The thickne of the wire is 1.4mm, and it can be bent and folded without affecting the use.

3. Is there any EMI shieldingfor Cable?

No metal shield. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electroic interference shielding with conducting polymer to guard against incoming or outgoing emiions of electroic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

Product real shot: