S1 S2 USB 3.0 Type~A 90 degree Adapter 5cm~100cm FPC Ribbon Flat USB Cable Pitch 20pin for Multi Photography

Brand name: ADT-LINK

Product name: USB 3.0 flat Cable

Product model: USS series

nsfer speed: support of increased up to 10Gbps (50cm Max.), 5Gbps (200cm Max.)

Current capacity: 3A (Length within 50cm supports 3A, within 2m supports 1.5a)

Wire length: 3 ~ 200 cm, the length can be customized,

Application: , ROCK Pi 4 raspberry Pi microcontroller development board, built-in USB device extension switch use, convenient for brushle head, steering engine head, small s head, SLR head USB power supply and AV nsmiion and so on

ADT USB series Part-Number Description:

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the and the connector. For the wire length, please refer to the 5cm black arrow in the figure below.

Product advantages:Material advantages: use German patented ed wire, use high quality gold-plated connectors, high frequency support HDMI 2.0 stable nsfer. uses high-quality low-resistance high-quality materials, workmanship precision, uses high TG sheet, copper thickne is thickened to 1oz; connector gold-plated conductive performance, can reduce the black screen blue screen sp caused by increased oxidation rust resistance Flower screen problem.Design advantages:differential signal without via design, no CAF micro short circuit phenomenon, high speed signal data nsmiion without parasitic capacitance and parasitic inductance signal attenuation interference problem, power circuit enhanced wiring design, board miniaturization design, can reduce mechanism interference , no card hardware, product installation is easy.Production advantage:Our factory direct s, product customized production, welding at the metal welding point during production. And put on the heat-shrinkable tube protection, the product is firm and reliable, there will be no problem of disconnection and disconnection. The product works well, stable and reliable.

Q&A:

Is there any EMI shielding for Cable?

The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electroic interference shielding with conducting polymer to guard against incoming or outgoing emiions of electroic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

Can wires and connectors be split?

No, in order to purify the signal nsmiion and avoid the accident of wire falling off, our wire and connectors is and protected by the heat shrinkable tube sleeve, so the product can not be separated.

How compatible are wires?

Supports USB 3.0 high-speed, all of product test P 100% before shipping.

Cable thickne? Can it be bent?The thickne of the wire is 1.1mm, and it can be bent and folded without affecting the use.

How many weights does the product have?

The weight of the wire 5cm is 1.57g. The weight of the connector and the board is 7.45g (the specifications and models are numerous, for reference only)

Photo: