RF4 HDMI 1080P 60FPS 2K Camera Video Microscope Camera Industrial Electronic Digital Observing IC Welding Repair

RF4 HDMI 1080P 60FPS 2K Camera Video Microscope Camera Industrial Electronic Digital Observing IC Welding Repair

Function of 2K microscope camera:

The HDMI industrial camera has 8 movable horizontal lines or 8 vertical lines, of which 1 to 8 can be selected through the menu. The maximum resolution of HDMI output is 1920x1080 60Hz. To ensure safety, please read the operating instructions in detail.
Packaging parts:
One industrial camera host, one 12V or 5V DC power supply, one remote controller, and one operation manual.
Interface and key functions:
:
The industrial is installed on the CS interface of the camera, the HDMI OUT interface is connected to the data line of the display, and the 12V DC interface is connected to the 12V or 5V DC power line. The indicator light is green after power on, indicating that the camera has worked normally.
Menu operation:
Press the MEMU key once to open the main menu. After opening the main menu, you can see the image , function settings, device management, pop-up disk, and exit the submenu. Use the ▲/▼ keys to move the cursor to select the submenu to enter, and then press the key to enter the submenu pointed the cursor. After entering the submenu, use the " /-" key to adjust the value. The default value in the image is "automatic white balance", and "one button white balance" is required. First set "automatic white balance" to "NO", p a piece of white paper under the , and then trigger the "one button white balance" item.
Common probl and solutions:
1. Restore factory settings: MEMU key ->equipment management ->restore factory settings.
2. One click white balance: MEMU key ->image ->automatic white balance (set to NO) ->trigger the "One click white balance" option.
3. Key use: press once to capture the image; press for 2 seconds to record (REC flashes on the left of the drive letter), and press for 2 seconds to end recording.
4. Picture preview key: press the MEMU key twice to enter the picture/video preview interface, and combine the "▲/▼/ /-" keys to enter the corresponding picture/video preview.
5. Line color change: MEMU key ->function setting ->left and right keys to adjust line color (set to YES) ->exit to adjust through "▲/▼" keys.
6. The LCD display is incomplete with black edges, please press the AUTO button on the display.
7. If the or imaging element has dust, please clean it with absolute l (absolute l) or wipe it off with eyeglass cloth.
Camera :
1. Imaging element 2k 1/2.8-inch CMOS, effective pixel 1920X1080, frame rate 60 frames/second, definition 900 lines.
2. The CS interface is adopted, and the of any CS interface can be selected.
3. Power input: 5V to 12V DC, the maximum working current is 400mA at 5V, and 200mA at 12V.

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.