Recordable Sound Module Programmable Sound Chip For Greeting Card USB Charging Voice Board For DIY Toys Creative Gifts

is_customized : YesModel Number : 1651 on version (4M RAM)Operating Temperature : n/aDissipation Power : n/aSupply Voltage : n/aApplication : ComputerCondition : NewType : ModuleBrand Name : ICGOICIC : Mainland China
JR1651 Music Greeting Card movement on version?Description:【FREE ADJUSTMENT】It is a updated sound module, you can adjust the volume and playback mode at will. Referring to the manual:http://attach01.oss-us-west-1.aliyuncs.com/IC/Datasheet/GY20461.pdf【SUPPORT MAC AND WINDOWS】Our programmable sound module can be used on Mac or Windows computers, it is recognized as a USB drive, just like an MP3 player, and you're free to add any MP3 audio file【RECHARGEABLE VOICE MODULE】There are 2 batteries come with the sound board, and in addition, you can also use the USB cable to charge and change music（USB cable is NOT INCLUDED）【SELF-ADHESIVE】On the back of the board, there is a layer of film, tear off this film and you can freely paste the module to any item you want, such as a gift box. It can hide in anything, such as stuffed animal toys, music box, greeting card, photo frame and so on【4M STORAGE】The module can store up to 4M music files, the files can be music, recordings, etc. If it is used in gift boxes or toys, it will be an excellent DIY giftNote:1.It can not play if connected to PC. So please remove the USB before play music.2.Switch must be turned on when update the music, otherwise the PC will not recognize it which results in the inability to update the music files and just can charging for battery.3.Built-in test music and configuration files, please test whether the on and speaker can work normally before use. on can can play and switch music.4.It can just play mp3 music file.Use StepsTest1.Turn the power switch to ON.2.Press on to play music and the blue LED indicator turns on when playing. Then LED turns off when playback ends.3.Press again to switch next music.Update music file1.Connect sound module to PC with USB data wire and the red LED indicator turns on.2.Turn the power switch to ON and then it will be identified as a removable device by PC.3.Delete the mp3 music files and then put in your new music files.4.Open ‘CONFIG.txt’ file to change play mode and play volume.5.Remove from PC and press on to play music.