RC3563 Battery Internal Resistance High-precision Trithium Lithium Iron Phosphate 18650 Battery meter

This product supports serial ports and computer . If you need to connect to a computer, please leave your email aess when placing an order, and we will send you the serial port driver and computer via email.

【Product features】

1. ligent control, LCD display

2. The battery internal resistance can measure the internal resistance and voltage of the battery at the same time

3. Used to measure the AC resistance of s and low resistance value of high precision resistance

4. High precision, high efficiency, low cost, light weight, energy saving and environmental protection

5. Widely used in various battery production, maintenance, testing, scientific research laboratories and other ocns

【Product s】

Measuring s: AC resistance, DC voltage

Basic accuracy: resistance 0.5%, voltage 0.5%

Speed: 5 times/second

Adjustment: Correction for resistance and voltage separately

Measuring ranges:

Resistance: 0.0001mΩ~200Ω

Voltage: 0.0001V~±100V direct current

Resistance ranges: 6 ranges automatic and manual

Voltage ranges: 3 ranges automatic and manual

Language: Chinese and English switch at will

Display results: LCD screen display, read only

Battery: Built-in 1000mAh lithium battery shipped with built-in battery

【Notes】

1. Due to manual measurement, please allow 1-3cm error and e sure you don't mind before ordering.

2. Please understand that there may be colour differences due to the location of the pictures.

【Paand list】

Package A:RC3563 High-precision battery voltage internal resistance *1RC3563 High-precision battery voltage and internal resistance clip*1

Package B:RC3563 High-precision battery voltage internal resistance *1RC3563 High-precision battery voltage internal resistance probe*1

Package C:RC3563 High-precision battery voltage internal resistance *1RC3563 High Precision Battery Voltage Clamps*1

Package D:RC3563 High-precision battery voltage internal resistance *1RC3563 High-precision battery voltage and internal resistance clip*1RC3563 High-precision battery voltage internal resistance probe*1RC3563 High Precision Battery Voltage Clamp*1

Instructions for use

1. Short press "enter key " to turn on.

2. press "enter key " to shut down.

3. Press the "set key" to enter the setting state, then press the "select key" to select different functions, and then press the "enter key" to enter the corresponding function.

4. Enter the resistance calibration/voltage calibration state. At this time, the test line should clamp the calibration resistance or voltage, press the "set key" to select the gear to be calibrated, and then press "+" and "-" to adjust the displayed value to be equal to the calibration resistance or voltage , Press the "select key" to select "ok" or "Cancel", and finally press the "enter key " to decide whether to save or cancel.

As can be seen from the table below, the larger the battery capacity, the smaller theinternal resistance. It is generally believed that if the internal resistance of the batteryis greater than 1.25 times of the factory standard, it indicates that the battery hasbeen severely aged and needs to be repd in time.

usage example

Sampling resistance

PC Interface