This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeComputingComputers & AccessoriesComputer ComponentsFans & CoolingRaspberry Pi Pico Board RP2040 TYPE-C / MICRO Dual-Core 264KB ARM Low-Power Microcomputers High-Performance Cortex-M0+ Processor
Shipped from abroad
Raspberry Pi Pico Board RP2040 TYPE-C / MICRO Dual-Core 264KB ARM Low-Power Microcomputers High-Performance Cortex-M0+ Processor
GH₵ 476.00
GH₵ 697.0032%
In stock
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 42.84 to Tema
0 out of 5
(No ratings available)Variation available
Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 42.84
Ready for pickup between 25 October & 30 October when you order within next 15hrs 53mins
Door Delivery
Delivery Fees GH₵ 54.74
Ready for delivery between 25 October & 30 October when you order within next 15hrs 53mins
Return Policy
Free return within 15 days for all eligible items.Details
Seller Information
Yuecao
60%Seller Score
Be the first to follow
Seller Performance
This seller does not have enough history for us to evaluate his performance yet
Product details
The Raspberry Pi Pico is a microcontroller board based on the Pi RP2040 microcontroller chip. It has been designed to be a low-cost, high-performance microcontroller board with flexible digital interfaces. The Pi Pico features two ARM Cortex-M0+ cores run up to 133MHz; 256KB RAM; 30 GPIO pins; and a broad range of interfacing options. This is paired with 2MB of onboard QSPI Flash memory for e and data storage.
In addition to powerful hardware resources, Pico has rich and complete software support and community resources. It comes with a complete Pi official C/C++ SDK, Micropython SDK.
Pico has been designed to use either soldered 0.1" pin-headers (it is one 0.1" pitch wider than a standard 40-pin DIP package) or can be used as a surface-mountable 'module', as the user IO pins are also castellated. There are SMT pads underneath the USB connector and BOOTSEL on, which allow these signals to be accessed if used as a reflow soldered SMT module.
Specification:
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of on-board Flash memory
• Castellated module allows soldering direct to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8 × Programmable I/O (PIO) state machines for custom peripheral support
In addition to powerful hardware resources, Pico has rich and complete software support and community resources. It comes with a complete Pi official C/C++ SDK, Micropython SDK.
Pico has been designed to use either soldered 0.1" pin-headers (it is one 0.1" pitch wider than a standard 40-pin DIP package) or can be used as a surface-mountable 'module', as the user IO pins are also castellated. There are SMT pads underneath the USB connector and BOOTSEL on, which allow these signals to be accessed if used as a reflow soldered SMT module.
Specification:
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of on-board Flash memory
• Castellated module allows soldering direct to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8 × Programmable I/O (PIO) state machines for custom peripheral support
Specifications
Key Features
The Raspberry Pi Pico is a microcontroller board based on the Pi RP2040 microcontroller chip. It has been designed to be a low-cost, high-performance microcontroller board with flexible digital interfaces. The Pi Pico features two ARM Cortex-M0+ cores run up to 133MHz; 256KB RAM; 30 GPIO pins; and a broad range of interfacing options. This is paired with 2MB of onboard QSPI Flash memory for e and data storage.
In addition to powerful hardware resources, Pico has rich and complete software support and community resources. It comes with a complete Pi official C/C++ SDK, Micropython SDK.
Pico has been designed to use either soldered 0.1" pin-headers (it is one 0.1" pitch wider than a standard 40-pin DIP package) or can be used as a surface-mountable 'module', as the user IO pins are also castellated. There are SMT pads underneath the USB connector and BOOTSEL on, which allow these signals to be accessed if used as a reflow soldered SMT module.
Specification:
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of on-board Flash memory
• Castellated module allows soldering direct to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8 × Programmable I/O (PIO) state machines for custom peripheral support
In addition to powerful hardware resources, Pico has rich and complete software support and community resources. It comes with a complete Pi official C/C++ SDK, Micropython SDK.
Pico has been designed to use either soldered 0.1" pin-headers (it is one 0.1" pitch wider than a standard 40-pin DIP package) or can be used as a surface-mountable 'module', as the user IO pins are also castellated. There are SMT pads underneath the USB connector and BOOTSEL on, which allow these signals to be accessed if used as a reflow soldered SMT module.
Specification:
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• 264KB of SRAM, and 2MB of on-board Flash memory
• Castellated module allows soldering direct to carrier boards
• USB 1.1 with device and host support
• Low-power sleep and dormant modes
• Drag-and-drop programming using mass storage over USB
• 26 × multi-function GPIO pins
• 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels
• Accurate clock and timer on-chip
• Temperature sensor
• Accelerated floating-point libraries on-chip
• 8 × Programmable I/O (PIO) state machines for custom peripheral support
What’s in the box
1x packages
Specifications
- SKU: GE779EA3J8DQBNAFAMZ
- Model: X-DNPJ-6-23-1056
- Production Country: China
- Size (L x W x H cm): 20x10x20
- Weight (kg): 0.4
- Color: Lite Black 16M
- Main Material: other
Verified Customer Feedback
This product has no ratings yet.
Raspberry Pi Pico Board RP2040 TYPE-C / MICRO Dual-Core 264KB ARM Low-Power Microcomputers High-Performance Cortex-M0+ Processor
GH₵ 476.00
GH₵ 697.0032%
Questions about this product?