HomeComputingComputer Peripherals & AccessoriesInput DevicesTouch PadsRaspberry Pi 4 Dual 2.5" SATA HDDSSD Shield X883 For Raspberry Pi 4 Model B 8GB4GB2GB
product_image_name-Generic-Raspberry Pi 4 Dual 2.5" SATA HDDSSD Shield X883 For Raspberry Pi 4 Model B 8GB4GB2GB-1

Share this product

Shipped from abroad

Raspberry Pi 4 Dual 2.5" SATA HDDSSD Shield X883 For Raspberry Pi 4 Model B 8GB4GB2GB

GH₵ 1,155.28
GH₵ 1,993.5842%

In stock

Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 90.39 to Tema
0 out of 5
(No ratings available)
Variation available

Promotions

Delivery & Returns

Shipped from abroad 

Choose your location

Pickup Station

Delivery Fees GH₵ 90.39
Ready for pickup between 06 January and 09 January if you place your order within the next 52mins

Door Delivery

Delivery Fees GH₵ 102.29
Ready for delivery between 06 January and 09 January if you place your order within the next 52mins

Return Policy

Free return within 15 days for all eligible items.Details

Seller Information

Genfan Department Store

86%Seller Score

2 Followers

Follow

Seller Performance

Shipping speed: Good

Quality Score: Excellent

Customer Rating: Good

Product details

[Overview]

This is an ultra-compact raspberry pi 4 dual 2.5 inch sata hdd/d storage board X883, it allows two 2.5" HDD/SSD to working at the same time with your Raspberry Pi 4 . The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds.

The built-in LED light indicates the reading or writing status – no more guework again.

Note:

Raspberry pi , 2.5" SATA SSDs/HDDs , power adapter are all not included

Due to installation restrictions, please pay attention to the thickne of the hard drive

As with all SSDs, new media must be formatted before use

Older SSD drives with le efficient flash media may not perform as well as newer drives

image

[Packing List]

1 x X883 Shield (Support Dual 2.5 inch SATA HDD/SSD)

1 x Carrier Board (To mount raspberry pi on X883)

1 x USB 3-D Connector

1 x 2-Pin Power Connection Wire

6 x Spacer F/F M2.5 x 14mm

2 x Spacer M/F M2.5 x 14+5mm

12 x Screw M2.5 x5mm

4 x Screw M3 x 6mm

[Power Supply Requirement]

Power supply: 5Vdc +/-5% , ≥4A

Ports & Connectors: DC jack - 5.5x2.5mm

Pls use high quality power adapter, or the HDD/SSD may cannot be recognized.

[Features]

Ultra-compact storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield

Supports dual 2.5 SATA HDDs/SSDs working at the same time

Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying

Function to power the RPI via XH2.54 only needing a single power supply

Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers

Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac

LED blue indicator indicates each drive status

Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi

Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)

Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A, smart power mgmt)

image image image

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.

Specifications

Key Features

  • ROM Capacity:None
  • Model Number:X883
  • Demo Board Type:ARM
  • Origin:Mainland China
  • Certification:NONE

What’s in the box

1X Raspberry Pi 4 Dual 2.5" SATA HDD/SSD Shield X883 for Raspberry Pi 4 Model B 8GB/4GB/2GB

Specifications

  • SKU: GE779EA4HR3PVNAFAMZ
  • Model: MOMyanshibanpeijian2626
  • Production Country: China
  • Size (L x W x H cm): 10x8x6
  • Weight (kg): 0.3
  • Main Material: PVC

Verified Customer Feedback

This product has no ratings yet.

Raspberry Pi 4 Dual 2.5" SATA HDDSSD Shield X883 For Raspberry Pi 4 Model B 8GB4GB2GB

Raspberry Pi 4 Dual 2.5" SATA HDDSSD Shield X883 For Raspberry Pi 4 Model B 8GB4GB2GB

GH₵ 1,155.28
GH₵ 1,993.5842%
Questions about this product?

Recently Viewed

See All