This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
In stock
2offers starting fromGH₵ 894.54
See More OffersShipped from abroad
Free return within 15 days for all eligible items.Details
fuma92
60%Seller Score
Be the first to follow
Shipping speed: Average
Quality Score: Excellent
Customer Rating: Excellent
Sold by: yunfeng_phone_shop | Seller Score: 60%
[Overview]
This is an ultra-compact raspberry pi 4 dual 2.5 inch sata hdd/d storage board X883, it allows two 2.5" HDD/SSD to working at the same time with your Raspberry Pi 4 . The SuperSpeed USB 3.0 port delivers a blistering data transfer rate of up to 5Gbps, letting you transfer a large amount of data in seconds.
The built-in LED light indicates the reading or writing status – no more guework again.
Note:
Raspberry pi , 2.5" SATA SSDs/HDDs , power adapter are all not included
Due to installation restrictions, please pay attention to the thickne of the hard drive
As with all SSDs, new media must be formatted before use
Older SSD drives with le efficient flash media may not perform as well as newer drives
[Packing List]
1 x X883 Shield (Support Dual 2.5 inch SATA HDD/SSD)
1 x Carrier Board (To mount raspberry pi on X883)
1 x USB 3-D Connector
1 x 2-Pin Power Connection Wire
6 x Spacer F/F M2.5 x 14mm
2 x Spacer M/F M2.5 x 14+5mm
12 x Screw M2.5 x5mm
4 x Screw M3 x 6mm
[Power Supply Requirement]
Power supply: 5Vdc +/-5% , ≥4A
Ports & Connectors: DC jack - 5.5x2.5mm
Pls use high quality power adapter, or the HDD/SSD may cannot be recognized.
[Features]
Ultra-compact storage solution for Raspberry Pi 4 - Dual 2.5" SATA HDD/SSD Shield
Supports dual 2.5 SATA HDDs/SSDs working at the same time
Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying
Function to power the RPI via XH2.54 only needing a single power supply
Integrated USB 3.1 Gen1 to SATA 6Gb/s bridge controllers
Quick file transfer with high-speed USB3.1 5Gb/s connectivity from a PC or a Mac
LED blue indicator indicates each drive status
Fully compatible with X735 for intelligent power management and cooling your Raspberry Pi
Fully compatible with X765 for powering over Ethernet (POE, 5V 5A)
Fully compatible with X728 for uninterruptible power supply (18650 UPS, 5.1V 8A, smart power mgmt)
About shipping
This product has no ratings yet.