QIACHIP 433.92Mhz DC 5V 12V 24V 48V 10A 4CH Relay Module Receiver EV1527 Wireless Remote Control Switch 433Mhz for DC Motor DIY

Product Application Area?

Products can be used in lighting, garage doors, shutter doors, remote control curtains, DC motors, motor reversing. and many more



About this item

【Universal Wireless Remote Control】 From simple main remote control to autonomous control such as windows, entrance, garage doors, alarm system, lifting devices, light, rolling door

【High sensitivity】433Mhz wireless remote control can pass through walls, floors and doors at a reliable distance. Maximum signal range is up to 164ft/50m with no obstacle,The receiver is suitable for DC 6V~30V voltage, so both DC12V and DC24V is OK. It is more flexible to use.

【Stable and Reliable】With high reception sensitivity (> - 105dBm), the 2 remote control switches adopt wireless coding technique, non-directional switch, do not disturb each other. It can be used with the remote control to switch between momentary/toggle/latched 3 working modes

【Intelligent Learning Mechanism】Learning Code provides high security due to low repetition rate and re-learning mode, which allows you to erase the old code and re-learn a new code when a remote is lost.

For Receiver Module :

Model: KR1204B-4
Working Voltage: DC 5V-80V
Product Type: 4-Channel Remote Control Switch
RF Working Mode: ASK Superheterodyne Reception
Modulation Mode:ASK
Working Mode: Momentary/Toggle/Latched, etc.
Matching Mode: Intelligent Learning Code.

Quiescent Current:5mA
RF Frequency: 433MHz
Output Current: ≤10A
Receiving Sensitivity: >104dbm

Wiring instructions:
1, +: Connect to the positive 12V power supply
2. - : Connect to the negative electrode of 12V power supply
3, A: output; normally open end of the relay
4, B: output; relay common;
5, C: output; normally closed relay

Operation Introduction:

About Working Mode:
1. Momentary/Joggle: Press and hold->On; Release->Off
Keep pressing one button, the corresponding channel is working /on; Release your finger is stop/OFF. (4 channel switch(receiver) need 4 button remote control (transmitter )
2. Toggle/Self-Lock: Press->On; Press again->Off
Press one button for one time, the corresponding channel is working/on; Press the same button again to stop/OFF. (4 channel switch(receiver) need 4 button remote control (transmitter).
3. Latched/Inter-Lock: Press->on; Press other button->Off
Press one button for one time, the corresponding channel is working/on; Press another button is stop/OFF(At the same time, another corresponding channel works). (4 channel switch( receiver) need 4 buttons remote control (transmitter).

The Setting of Working Mode:

1.Momentary Mode: Pressing the learning key button on the receiver board once (LED Indicator on receiver board will signaling simultaneously), then press any of the remote button, signaling three times by remote's LED indicator means setting Momentary Mode successfully.

2. Toggle Mode: Pressing two times the learning key button on the receiver board twice(LED Indicator on receiver board will signaling simultaneously),then press any of the remote button , signaling three times by remote's LED means setting Toggle Mode successfully.

3.Latched Mode: Pressing the learning key button on the receiver board three times (LED Indicator on receiver board will signaling simultaneously), then press first remote button, follow on second remote button, signaling three times by remote's LED indicator means setting Latching Mode successfully (first button stands for on, second button stands for off ).

4.2CH Momentary + 2CH Toggle: Pressing the learning key button on the receiver board four times(LED Indicator on receiver board will signaling simultaneously),then press any of the remote button , signaling three times by remote's LED indicator means setting successfully.

5. 2CH Momentary + 2CH Latched: Pressing the learning key button on the receiver board five times(LED Indicator on receiver board will signaling simultaneously), then press any of the remote button, signaling three times by remote's LED indicator means setting successfully .

6. 2CH Toggle + 2CH Latched: Pressing the learning key button on the receiver board six times(LED Indicator on receiver board will signaling simultaneously), then press any of the remote button, signaling three times by remote's LED indicator means setting successfully.

7. 2CH Latching + 2CH Latched: Pressing the learning key button on the receiver board seven times(LED Indicator on receiver board will signaling simultaneously), then press any of the remote button, signaling three times by remote's LED indicator means setting successfully.

8. Deleting Existing Remote Controls Data: Pressing the learning key button on the receiver board eight times, the LED Indicator on receiver board will flash for eight times, it means that the existing remote controls are deleted successfully.

Dear friends, I have a demo video on this product details page.





*If you don't understand. Please feel free to send us a message. We




will do our best to serve every customer. Happy shopping*.











Specifications:
Use: Universal
Working Mode: Momentary, Toggle, Latching Mode
Support APP: No
RF Working Mode: Superheterodyne
Wireless Communication: RF
Use: Lighting, Electric Door, Switch, Automated curtains, DC Motor DIY

Features:
-Solid Stae Relay-Relay App Delivery-Electromagnetic Relay-

**Versatile Control for Everyday Applications**
The QIACHIP 433.92Mhz DC 5V-48V 10A 4CH Relay Module Receiver is a versatile solution for controlling various devices in your home or office. With its universal compatibility, this module can be used for a wide range of applications, from lighting control to automated curtains and DC motor DIY projects. The module supports three working modes—momentary, toggle, and latching—to cater to different control needs. Whether you're looking to switch on a light with a momentary press or maintain a state with a toggle, this module has got you covered.

**Reliable and Secure Wireless Communication**
The module's RF working mode ensures reliable wireless communication, allowing you to control devices from a distance without the need for direct line-of-sight. With a signal range of up to 164ft/50m, you can operate your devices from afar, making it perfect for garage doors, sunroofs, and other automated systems. The module's intelligent learning code mechanism provides high security, making it difficult for unauthorized users to access your system. The module's quiescent current of 5mA ensures minimal power consumption, making it an eco-friendly choice for your smart home or office.

**Easy to Install and Use**
Setting up the QIACHIP 433.92Mhz DC 5V-48V 10A 4CH Relay Module Receiver is a breeze. With its simple wiring instructions and intuitive operation, you can have your devices under control in no time. The module's high reception sensitivity ensures that signals are received reliably, even through walls and doors. The module's intelligent learning code mechanism allows for easy setup and reconfiguration, making it a flexible solution for your control needs. Whether you're a DIY enthusiast or a professional looking to automate your space, this module is an excellent choice for your projects.








































?width=950&height=1546&hash=2496