PS100 N1201SA 140MHz2.7GHz UV RF Vector Impedance ANT SWR Antenna Analyzer SWR Meter Tester

This instrument has four interfaces: single point measurement, scanning, system information, correction and calibration. The default boot into single-point measurement interface.
Note: For the convenience of users, each time calibration correction options will automatically change to users' calibration. Meanwhile, in order to ensure the integrity of the calibration, the calibration process, the automatic shutdown function fails, the consistent boot.
Attention: You need to hold down the second key and the fourth key at the same time to turn it on.
Startup and Shutdown: Hold down the CTRL key off press the power switch button.
The boot state, long press (2S above) the switch button, after the release, the instrument will shut down.

Specifications: 63241
Model No.: PS100/N1201SA
Working Frequency: 137.5MHz~2.7GHz
Stepped Frequency: 1kHz
Display: 2.4inch TFT with resolution 320*240(QVGA)
Power Consumption Less than 1.5W
Charging Current: 400mA
Charging Port: USB
Auto Power Off: Settable 5-60minutes
Measured Parameters: Impedance, reactance, SWR and S11
Resolution: 4-digit readings
Frequency Accuracy: Less than ±10ppm
Connector: SMA-K
Impedance Measurement Range:
1Ω~1000Ω @frequency Less than 1300MHz;
1Ω~300Ω @frequency Greater than 1300MHz (Impedance Absolute Value)
Standing Wave Measurement Range:
1~65 @frequency Less than 1300MHz;
1~10 @frequency Greater than 1300MHz
S11(dB)Measurement Range: 0dB to -50dB
Error (Single-point measurement):
For Impedance: Less than Impedance absolute value x 5%±0.1Ω (Z Less than 200Ω, Less than 1.5GHz)
For Standing Wave: Less than Effective readings x 10%±0.1
For S11: 0.1dB/5° (0dB to -10dB)
For (dB/°): 1dB/10° (-10dB to -20dB); 5dB/20° (-20dB to -40dB)
Directivity: Less than 35dB (140MHz to 2GHz after calibration); Less than 30dB (2GHz to 2.7GHz)
Scanning Points: 280
Output Level: -18dBm
Working Temperature: 0℃ to 40℃
Atmospheric Pressure: 860hPa~1060hPa
Material: Aluminum alloy
colour: black

Package Contents:
1 x Antenna Analyzer
1 x USB cable

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.