Professional Integrated Circuit IC Tester Transistor Tester 5V 3.3V Automatic Modes Multi-function Instrument Maintenance Tester

This is a multi-function maintenance tester specially designed for first-line maintenance personnel. It can choose different test modes 5v mode, 3.3v mode, auto mode, etc. It can test 74ch series, 74ls series, CD4000 series, HEF400 series, 4500 series, Operational amplifiers, interface chs, s, automatic identification of transistors, identification of voltage regulator values, etc. There are more than 1,300 built-in ch data models and more than 420 transistor data models, covering most common devices within 24 pins, which can greatly reduce maintenance workload and improve maintenance efficiency.

Introduction to the working princle:

The maintenance wizard uses 2 AA batteries ( not included ), which consumes le power and is easy to buy. Pre the enter key for more than 2 seconds to turn on the power. After turning on the power, the self-test will be performed automatically. After the self-test is paed, the battery voltage will be detected and displayed on the screen. (The 06 type shows the system voltage.) Guaranteed measurement accuracy. If there is no alarm, the measurement can be started. The local AD is 10-bit AD, and the theoretical resolution for 5v voltage is 0.0048v. Due to the use of battery power, it is not suitable for measuring high-power thyristors. The voltage regulator value of the voltage regulator tube should be based on the actual measurement, not just the nominal value. The default directory after booting is the search directory.

The maintenance aistant 9v laminated battery, like the ordinary multimeter battery, consumes a very ordinary digital multimeter. Pre the Enter key to start the machine for the first time and automatically run a self-test. After the self-test detects that the battery voltage exceeds two seconds, it will be displayed on the screen. When the battery voltage is lower than 7v, replace the battery to ensure the measurement accuracy. If there is no alarm, the measurement can be started. Native ad 10 ad, the theoretical resolution of 5v voltage is 0.0048v. Due to the use of battery power, it is not suitable for measuring high-power thyristors. The Zener value must be based on the actual measurement, not just the nominal value. The default directory for initialization is the search directory. The test of an ordinary has as many as a dozen parameters. Simply measuring the logic ratio does not have much practical significance. This machine can test the secry saturation voltage for reference. Tests a standard 4ft .

Instructions for use of the multifunctional integrated circuit tester:

tsh series multi-function integrated circuit tester is a profeional equment designed by first-cla microelectronic engineers and maintenance teams.

You can choose from different test mode

5v mode,

3.3v mode,

automatic mode

It can test osmo series, osmo series, cd4000 series, hef400 series, 4500 series, op amp, interface ch, , triode automatic recognition regulator voltage regulation value recognition, etc.

There are more than 1,300 types of integrated ch data models and more than 420 transistor data models, covering the most common general-purpose 24-pin devices, which can significantly reduce workload and improve work efficiency.

instruct:

There are seven ons on the panel for up, down, left, right and type keys and hot keys o, p.

The up and down keys are used to adjust the catalog and change the model, and the left and right keys are used to move the cursor left and right to select the item to be changed. The enter key is used to switch machines and execute test commands. Open the battery cover on the two 5 #1.5v batteries and close the battery cover. Pre Enter for more than 2 seconds to turn on the machine, the current battery voltage will be displayed automatically when the power is turned on. When the battery power is too low, replace the battery. If the voltage is too low, the reliability of the test results and the automatic shutdown protection will be affected.

Power on: Pre the Enter key for more than 2 seconds to power on.

Shutdown:

1 Pre the Enter key in the OFF directory to shut down immediately.

2 Pre to enter any directory and pre the Enter key for more than 10 seconds to hang up.

3 Automatically shut down after 60 seconds without any operation

Shortcut:

1 pre the 0 key to quickly turn off the key (06 type)

on 2 p key Repeat self-test, reset on

Note: Transistor display pin order from left to right corresponds to 10-foot, 11-foot, 12-foot ic block respectively.

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.