Portable VNA SWR 6GHZ Vector Network Analyzer

GS-320 Hand vector network analyzer VNA (reflectometer) 23-6200 MHz is designed to measure the matching characteristics of passive and active radio devices (antennas, cables, filters, attenuators, amplifiers, etc.). The device allows you to measure the parameters of the complex reflection coefficient, standing wave ratio (VSWR), impedance, admittance, magnitude, phase, loss and distance to fault in the cable.
GS-320 casing is a durable material in the form of mobile autonomous instrument and is primarily intended to work directly on the object, as with low weight and compact dimensions has a low energy consumption. The analyzer will be especially useful to companies working in of telecommunications, engaged in the installation and maintenance of antennas, in the amplification of cellular communication, etc.
With it, service centers and repair crews can carry out RF analysis cable and antenna when carrying out commissioning or repair work. In addition, the device is perfect for workshops, radio amateurs, educational institutions and laboratories. The device has a 3.2 inch color resistive screen to display the measurement results and control the device. For example, you can use the instrument to do the following: To perform impedance matching using the chart.
To measure the standing wave ratio. To measure the attenuation in the cable. To measure the distance to fault or irregularity in the cable. Advantages of vector network analyzer GS-320 23-6200 MHz: color touch screen with a diagonal of 3.2 inches allows for quick configuration of the scan parameters and display of measurement results. wide operating frequency range: 23 MHz to 6200 MHz
high scan rate of 1000 points/s. high precision of measurement: 0.25 dB and 1.5°over the entire frequency range. the ability to display up to four markers on all charts, allowing an accurate assessment of the measured parameter. display almost all possible interpretations of the reflection coefficient. the ability to measure the distance to fault and loss in the cable. supportsoftware of PC, can be controlled through PC interface(The software of PC can be obtained from dealers)

SPECIFICATIONS:
Operating frequency range: 23-6200 MHz
The frequency resolution: 10 kHz
Maximum number of scan points: 1000
Scanning rate: 1000 points/s
The direction of , uncorrected throughout the range: 12 dB
Directivity effective (after full single-port calibration): 50 dB
The standing wave ratio at the input: Less than 2
Phase measurement precision1: 1.50
Magnitude measurement precision1: 0.25 dB
Resolution determining the distance to fault2: (C x )/2S m
The maximum length of the measured cable3, with =1: 3000 m
Maximum DC input voltage: 25 V
Operating temperature range: 0...+40℃
Screen diagonal: 3.2inch
Screen type: touch resistive
Screen resolution: 320х240
Battery capacity: 4000 mAh
Continuous battery life4: ~4 h
Battery charge time: ~6 h
Material: metal+plastic
colour: As Shown

Package Contents:
1 x Handheld Vector Network Analyzer 23-6200 MHz
1 x Typc-USB connection cable
1 x SOL Calibration Kit
1 x N female to SMA male adapter
1 x Touch screen pen
1 x RF Test Board Kit

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.