Portable Needle and Thread Mini Hand Sewing Machine Set

matters needing attention

The fabric is too thin or too thick to use, and the thickness should not exceed 0.8mm

Make sure to tie a knot at the end, otherwise the thread will scatter

Tools/raw materials

Mini mobile sewing machine

Line

Needle piercer

 

Method/Steps

 

First, let's talk about the usage of the needle piercing device:

First, thread the needle through the pinhole, and then thread the thread through the needle. Pull back the needle threading device, and the thread will be brought over. It's very simple, isn't it.

Now let's talk about the steps

1. First, draw a wire from the coil and thread it through the plastic hole from bottom to top. Then, clamp the wire into the spring adjustment plate, which can be adjusted to a satisfactory position

 

2. Then thread the wire through the circular iron ring at the bottom of the upper part of the machine, hold the wire that passes through the iron ring, and now you can thread the needle. The technique of threading a needle has already been mentioned, the main thing is to pay attention to threading the thread from right to left.

 

3. After threading through the pinhole, the next step is to lift the pressure plate and thread the wire passing through the pinhole through the hole on the pressure plate.

 

Next, we started sewing. Lift the thread board and place the fabric under it. Press the pillow down on the fabric with your thumb, maintaining a constant speed and even force. After sewing, use scissors to pick out a section of the thread and cut it, so you don't have to thread it every time you use it.

4. Remove the machine and the wire ends at the back. Just tie a knot and it's okay