PETO Hydrogen Water Tester Monitor 4 In 1 H2 PH ORP TEMP Meter Reactive Oxygen Analyzer ATC 0-2400PPb For Aquariums Pools Spa

Excluding batteries!!!
Hydrogen Water Tester Monitor 4 in 1 H2 PH ORP TEMP Meter Reactive Oxygen Analyzer ATC 0-2400PPb for Aquariums Pools Spa

High-precision multi-function water quality tester, with the functions of measuring water PH value, ORP, hydrogen ion concentration, temperature and other functions. Automatic temperature compensation (0-60℃) measurement data update. It is easy to use, easy to carry, and it is good for the body to drink more water rich in hydrogen ions.

 

【YY-400 PH/ORP/H2＆TEM Meter Specifications】：

1.PH
Range: 0.01-14.00pH
Resolution: 0.01pH
Accuracy: ±0.05pH

2.ORP
Range: ±999mV
Resolution: 1mV
Accuracy: ±2mV

3.H2
Range: 0-2400ppb; 0.001-2.400
Resolution: 2ppb; 2ppm
Accuracy: ±10ppb; ±10ppm

4. Temperature
Range: 0.1-60.0°C 32.0-140°F
Resolution: 1℃/°F
Accuracy: ±0.5

Product Details:

1. Display: LCD digital display
2. Backlight: optional backlight
3. Temperature: automatic temperature compensation 0-60℃
4. Working environment: 0-60℃ (32.0-140°F); RH 100%
5. Waterproof: Ip67
6. Automatic shutdown: 5 minutes
7. Data retention: value retention
8. Battery: 3*1.5V (LR44) (not including battery)
9. Screen size: 33 * 24mm
10. Size: 183"37*37mm(7.2*1.5*1.5in)
11. Weight: 90g

Packing list :

1 * YY-400 Waterproof Mini pH Meter

FQA

Q: What type of battery does the product use? Are batteries shipped?

A: Products generally do not ship batteries, and online logistics cannot transport batteries. The type of battery is: 3 * 1.5V (LR44) button battery. Please buy it locally.

Q: Is it necessary to calibrate the function of the instrument to measure "hydrogen"?

A: The product has been calibrated before leaving the factory. The product cannot calibrate the function of the instrument to measure "hydrogen" by itself.

Q: Why does the "hydrogen" instrument measuring tap water display "0"? When measuring the "hydrogen" of electrolyzed water, the value will continue to change over time?

A: Under normal circumstances, the hydrogen content of water is "0", and the measurement data shows "0", which is correct. Need to use a hydrogen-rich cup after electrolysis, and then measure. The hydrogen content is relatively small, and the measurement data will also display "0". Hydrogen is very easy to volatilize, and the value will continue to decrease over time.

Q: What is the unit for measuring hydrogen? How to convert measurement units?

A: The factory default measurement unit of the instrument is ppb. When the instrument is turned on, press the FUN" key, and the measurement mode will be switched between ppb and ppm. (1ppm =1000ppb)

Q: What should I do if the received product is damaged, cannot be calibrated, cannot work normally, and the meter cannot recognize the solution?

A: Please protect the product and contact us in time to report product problems

Note:

1. The electrode should be cleaned after use
2. PH calibration: 1 point or 2 points or 3 points automatically. If the meter cannot recognize the solution, please replace the electrode or contact the supplier.
3. It has been factory calibrated and can be used directly.
4. After completion, clean the electrode with pure water and keep it dry.
5. Stir gently a few times to ensure that there are no bubbles around the electrode.
6. Do not disassemble the meter without permission.

Troubleshooting:

Ph reset

1. Turn off the meter, press HOLD/TEMP and MODE/CAL at the same time, don't release it.
2.Press ON/OFF, then release all buttons, the reset is complete.