Pen Barrel Mill Trimmer Set, 7-Pieces Professional Turners Trimming System

Pen Barrel Mill Trimmer Set,7pcs Professional Turners
1.If you love to turn pens or are considering taking pen turning up as a hobby, then this kit is a must for your pen blank preparation process. Typically after you have glued the brass tubes into your pen blanks and the tube is completely dry, it is common practice to clean up, square and trim the ends of the blanks.
2.This is done so that the blank is flat on both ends and to make sure the brass tube meets with the bushings in a clean true manner.
3.This kit provides you with an added bonus as the pilot cutter shaft cleans out any left over glue that may have been left behind during the glue up process. This pen barrel trimmer kit can be used on a drill press, with a hand drill or with your own shop made handle if so desired.
4.When using a hand drill or drill press, it is recommended that you use a pen centering vise (not included) to help secure the pen blank. It also helps to use a pen centering vise for better accuracy when drilling with the Pen Barrel Trimmer.
5.If you are using a hand drill, we recommend securing the blank into a workbench vise if a pen centering vise is not available to you. The kit includes a 3/4 inch cutting Head, 7mm, 8mm, 3/8 inch, 10mm Pilot Cutter Shaft, 0 Size Adaptor Sleeve and a Hex Key Wrench for the cutting head.
Heres a project that serves 3 purposes:
Makes using the lathe handles easier and less stressful
Provides a fun turning project
Makes your lathe look awesome
Kindly note that:
If the drill bits required are not available or the hole in the wood is too large, use the next larger bit and wrap a strip of masking tape over the metal to fill up the space for a snug fit.
When trimming the ends of a blank with the barrel adhered inside, use minimal pressure and raise and lower the barrel trimmer frequently to prevent the trimmer from burning the end of the blank and darkening or discoloring the wood.
Hard,resinous woods, those of the rosewood family, tend to burn easily if you trim too quickly. Trim for a second or less and back the trimmer out of the hole to check the depth of cut. Dont drill too deeply and cut into the brass.
Material:steel
colour:Silver
Package Contents:
4 * pilot shafts
1 * 3/4 inch squaring cutter
1 * Hex wrench
1 * copper tube
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !