PC817 3.6-30V 2 4 Channel Isolation Board Voltage Converter Adapter Module Driver Poelectric Isolated Module 817-4 channel

P roduct D escrtion

In actual work, I encountered the need for isolation control and voltage conversion At that time, this module will be used. Can achieve 3.3V or 5V control 3.6~24V voltage level interface,After the control terminal is turned on, the controlled terminal will also be turned on.The photoelectric isolation has strong anti-interference ability. It can drive high-power transistors behind, MOS tube and other occasions requiring high-voltage drive, can also directly drive small Power 24V relay works.

If it is a pulse signal, please note that the limit of 817 is 4KHZ or le Please do not use this module for control signals greater than 4KHZ, it will work Not working properly.

P roduct P arameter

1. Signal voltage at the drive end: 3.6-24V.

2. Output voltage range: 3.6-30V (output current depends on specific conditions But the peak value is not 10MA, the total power must be the opposite of voltage and current Than).

3. The jumper cap can realize whether the output terminal is high-potential output or pulled low Output.

4. All 4 817 channels on the board are independent and can achieve different voltages Simultaneous control etc.

5. Board size: 4 channels 47*38mm hole spacing 41*32mm

2 way 38*29mm hole pitch 32*23mm.

P roduct F eatures

1. It can realize low level drive high level, realize voltage conversion.

2. Use this module to convert the IO voltage of the single-ch microcomputer. Achieve isolated drive between different voltage levels.

3. Through the selection of jumper caps for each channel, you can achieve individual control of whether Common ground with input. The jumper cap is shorted for the negative output terminal and the negative power supply Extremely common.

4. Each channel has an independent power indicator light which can be pulled up by the MCU IO port Direct drive. Input 5V high level, 3-5mA current is enough drive.

P roduct A pplications

1. When the single-ch microcomputer output level is used to drive inductive devices such as motors Isolation, anti-interference and protection of part of the single-ch circuit.

2. The output level of the single-ch microcomputer is low, and the driving voltage of the driven module is high.Level matching, for example, some PLC inputs require 24V voltage to use this Module conversion

3. Used for inverter, can invert the input signal and output

4. Used for high voltage detection, for example: the output signal level of a r is 12V MCU voltage is 5V, this module can be used to isolate and detect The voltage of 12V single-ch microcomputer is 5V, and this module can be used to isolate and detect.

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.