This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
In stock
Shipped from abroad
Free return within 15 days for all eligible items.Details
Tianying store
66%Seller Score
34 Followers
Shipping speed: Average
Quality Score: Excellent
Customer Rating: Poor
Descrtions: This super small mono amplifier is able to deliver up to 2.5 Watts into 4-8 impedance speakers. Inside the miniature ch is a cla D controller, able to run from 2.0V-5.5VDC. It has built in thermal and over-current protection but we could barely tell it got hot. There's even a volume trim pot so you can adjust the volume on the board down from the default 24dB gain. The A+ and A- inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential' - if you don't have differential outputs, simply tie the Audio- pin to ground. The output is "Bridge Tied" - that means the output pins connect directly to the speaker pins, no connection to ground. The output is a high frequency 250KHz square wave PWM that is then 'averaged out' by the speaker - the high frequencies are not heard. Speaker is not included, use any 4 or greater impedance speaker. 1.Output Power: 2.5W at 4ω, 10% THD, 1.5W at 8ω, 10% THD, with 5.5V Supply 2.50dB PSRR at 1KHz 3.Filterle design, with ferrite bead + capacitors on output. 4.Fixed 24dB gain, onboard trim potentiometer for adjusting input volume. 5.Thermal and short-circuit/over-current protection 6.Low current draw: 4mA quiescent and 1uA in shutdown mode Package Included: 1x PAM8302 Mono Amplifier Board About shping
This product has no ratings yet.
Subscribe to our newsletter
and be the first one to know about our amazing deals!