Oscilloscope Transistor Detector Oscilloscope Resistance Meter Capacitance Meter

Oscilloscope Transistor Detector Oscilloscope Resistance Meter Capacitance Meter

Product features.

1. Use of high-quty materials, durable

2.2.5MHz sample rate, actual bandwidth 200KHz, analog bandwidth 0KHz (sine wave)

3. With a full range of trigger functions (single, normal, automatic), both for periodic analog signals and non-periodic digital signals can be used freely

4. Up to ±400V voltage signal can be measured

5. Equipped with efficient one-touch AUTO, the measured waveform can be displayed without tedious adjustment

6. With a key to save the waveform function

s.

Sampling rate: 2.5MHz

Analog bandwidth: 0KHz (sine wave)

Actual bandwidth: 200KHz

Measurement voltage: X1/± 40V X10/± 400V

Input impedance: 1MΩ

Storage depth: 1Kb

display: 12 kinds

PWM output: Frequency 1k～80KHz Duty cycle 0～100% Output voltage 3.3V

Function waveform: 17 kinds of waveforms

Output: frequency 1 ~ 1KHz Voltage range Vpp 0 ~ 3.3V (non-adjustable)

Display: 2. 4 inch TFT, 320*240 resolution

Charging voltage: 5V

Battery capacity: 600mA / h 3.7V

Uplink: not supported yet

Firmware upgrade: support

Size: width mm length 100mm (excluding BNC head)

Caution.

1. When measuring voltages over 40V, be sure to dial the probe gear to X10

2. When measuring high voltage (more than 36V AC voltage), do not touch the metal part of the instrument, especially the BNC connector location

3. Do not exceed the charging voltage of 6.8V to avoid ing the charging chip

4. When not firmware upgrade, try to toggle the lower left corner of the toggle switch, toggle to Nomal

Part of the instructions.

1.2uS, 5uS can not be used to measure waveforms other than sine waves.

2. Save waveform can only save the current display part.

3. Some of the measured signals cannot be captured correctly with AUTO and need to be adjusted manually.

4. Firmware upgrade: upgrade the display part, pre OK tightly to turn on the power, upgrade the bottom part, pre SAVE tightly to turn on the power.

Package list.

Mini oscilloscope * 1

Alligator clip test * 1

High voltage probe * 1 (high version has)