O M17 2 Hud Dial Car Speed Time Windshield Smart Water Temperature Auto Warning Head Up Display

HUD M17 2 Hud Dial Car Speed Time Windshield Smart Water Temperature Auto Warning Head Up Display

＜M17 2+ Dual System HUD＞▶Compared with similar products, 2+ dual system, more cost-effective▶S-contained hood, no glare when driving at night▶Dual connection interface, compared with similar products, there is one more choice▶The brightne is upgraded, and it is also clear during the day▶The car turns on within 3 seconds of starting. Auto shut off after 10 seconds when the car is turned off▶Easy to install, just connect and use.▶The brightne changes automatically, it becomes brighter on sunny days, darker on cloudy days, and darker at night.▶Easy to install, just connect and use.Note2 system: Compatible for Cars in the 2 systemWhen you're ready to p an order, but you don't know whether your car is compatible with the HUD, you can contact us! We're glad to help you! system: Compatible all cars.NO NEED TO LOOK DOWN,SHOW SPEED ON THE WINDSHIELD2 systemIt works while the car is moving, showing car data on the windshield.2 displays data: vehicle speed, coolant temperature, consumption, voltage, mileage, time, driving time, and compa.Alarm: overspeed alarm, high water temperature alarm, low voltage alarm, fault code alarm, fatigue driving alarm.Automatically turn on or off: 30 seconds after the engine is turned off, the HUD will automatically turn off; after the engine is started, it will be displayed automatically after 5 seconds. Our HUD has a switch that can be turned on and off manually. If you do not drive for a long time, it is recommended to manually close the HUD. systemIt is compatible with all cars! And support overspeed alarm.The working voltage of the product is 5v-12v.A Number of s to search for.Compa: N (North) E (East) W (West) S (South).Vehicle speed display, speed unit: MPH-mile, KM/H-km.Display time, and mileage.Fatigue driving alarm: The fatigue driving alarm time is 4 hours, the user can freely set this time or turn off the alarm, the setting time range: 1-8 hours.

Real shots

5 ALARM FUNCTIONSOverspeed alarm, high water temperature alarm, low voltage alarm, fault code alarm, fatigue driving alarm.+Beidou dual-mode chipUsing 10 Hz high refresh rate + Beidou dual-mode chip.Refresh rate 10 sheets/second, fast refresh speed, no delay.Hardware upgradeNew low power consumption chip, standby power consumption is significantly reducedAutomatic brightne adjustmentAutomatic switch on and offSupports two power cable CableUSB CableNOTE:The two interfaces cannot be connected at the same time, it will cause a short circuit.Just pick an interface to connect to and it works.

on function:

1. Short pre 'M'

system switching speed Voltage Water temperature Altitude consumption Driving time Mileage Clock Acceleration from 100 kilometers

system Switching voltage Altitude Driving time Driving mileage Clock Acceleration from 100 kilometers quantity

Long pre 'M' to enter the settings (1-14 settings see the manual) After adjusting, pre and hold for 5 seconds to save and exit

2. Short pre '-' to switch the system or system within 5 seconds when the power-on screen fes, and switch the speed icon after the normal display

Decrease the menu or value after entering the setting

Long pre '-' to turn off the , long pre again to turn on the

3. Short pre '+' to power on and the screen will flicker, short pre within 5 seconds to switch between system or system, switch display mode after normal display

Add menus or s after entering the settings

Long pre '+' system displays normally, long pre '+' and the screen is fully bright, and clear the fault code, long pre again to exit full brightne

4. Power switch: long pre to turn off, long pre again to turn on

system selection

After the power is turned on, the screen fes and short pre the '+' on to select or system, the display "1" is the 2 system, and the display "2" is the system. After 5 seconds of no operation, it will automatically enter the last selected system.

Functional Area Introduction

1. Photosensitive component: sense the external light intensity and automatically adjust the HUD brightne to adapt to the environment

2. Speed icon: mode displays engine speed, and mode displays vehicle speed progre bar

3. System icon: system and system Short pre the '+' on within 5 seconds to select the system

4. Multi-function display area: speed, water temperature, voltage, driving mileage, driving time, consumption, altitude, clock, acceleration per 100 kilometers

5. a+100km acceleration ASL altitude LHK consumption MIN driving time TRIP driving mileage

6. Water temperature icon Voltage icon

7. Overspeed alarm icon

8. Driving direction: After the vehicle speed exceeds 5KM/H, it will display the driving direction W West N North S South E East

9. Vehicle speed display

10. Speed unit: KM/H-kilometer unit, MPH-mile unit

11. icon; fes to search for s, please move the car to an open road, and the light stays on after the is found

Product composition

1. Box    2. M17 Machines    3. Non-slip mat   4. USB line   5. 2 line    6. Manual

How to Install the HUD Car Computer:

1. Insert the product into the check port on the vehicle computer;2. Insert the other end of the product into the data interface of the host;3. After the product is inserted into the host and the car is started, wait for the communication linkage between A202 and the car;

Please Note:

2 system is suitable for most cars after 2007.

2 can work for 2 oline vehicles produced after 2004 in the USA, and 2 oline vehicles produced after 2008 in other countries.

2 model is not applicable for the following cars:

Electric vehicles, diesel cars, hybrid vehicles, pick-up, buses...and so on. If you still have questions, please contact us before buying, and it's better to tell us your car manufacturer/ model/ year/ protocol before buying.

FAQ

1.No function is displayed, and no power

Check whether the cable is a tight connection, and pull it down repeatedly to confirm, please try it on another car if still not workable, yze if it is caused by diagnostic interface, and if yes, please repair it and connect the device again.

2. Only the car voltage displays and be automatic power off after 30 second

(1) This product is only available for II and E cars when it is in 2 mode

(2) 2 is a car protocol (U.S.A Cars:2003 Other regions:2007)

(3)This product 2 mode does not support I and J

(4) Switch to the system using the USB cable to display, within 5 seconds of power short pre the ‘+’ key to select the system.

3. Shut down and restart

Indicates that the voltage is higher than the starting voltage of 13.2V, enter the setting menu and short pre the ‘+’ key to item 11, set the voltage to 13.6-13.8V (the device can only be turned on after the vehicle voltage is higher than the setting voltage)

FAQ

1.No speed

The is fing to search for stars. Please move the car to an open road. After the is found, the light will be on and off, and it can be used normally.

2. Inaccurate speed

When the power is turned on, long pre the ‘M’ key for 5 seconds to enter the menu options, the menu displays 1, short pre the ‘M’ key to enter the value 107 and f, fine-tune the value according to how much difference between device and the dashboard.

(the dashboard displays 100 KM /H, the device displays 105KM/H and adjust the value to 102 through the ‘-’ key), after adjustment, long pre the ‘M’ key for 5 seconds to exit.

3. Inaccurate Time

Enter the setting menu item and short pre the ‘+’ key to item 13, short pre the‘+’ key to adjust the local time zone, if the HUD finds the signal, only needs to adjust to the local time, after adjustment, pre the ‘M’ key for 2 seconds to save and exit

pls contact us if you've got any questions!

After s:

After receivng the order, please kindly take some time to test it. Anything in need, please kindly contact us at any time, we offer lifelong time ree technical support.

And we offer one-year warranty, please kindly contact us to exchange a new unit or ask for acceories during this period.

If you don't want to keep the device after the test, you can also contact us to e return for full .

About nsportation：

After receiving the payment, it will be shipped as soon as poible. Please double check your addre before paying.

Iued within 48 hours

Ship from China warehouse

cking website after delivery. (https://global.cainiao.com/)

About Feedback

If you are satisfied with our products and services, please leave 5 stars. Thank you for supporting us.

If you have any questions, please contact us first, and we will try our best to solve the problem to your satisfaction.