New 3D Printer Accessories Mini 1.3 Mainboard Set for Prusa i3 MK2,No Display NO

Feature:

Type:Mini 1.3 Mainboard Set

Quantity:1 Set

Description:

1. Compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmware.

2. Crystals for both usb and mcu (timing accurate to 10ppm).

3. 4 Thermistor jacks.

4. All extra pins broken out on both processors (allows using the 32u2 for LUFA AVR programmer, etc.).

5. 2 channel SDRAMPS compatible SPI breakout.

Motor Drivers

1. 5 A4982 1/16th microstep motor drivers (A4984 1/8th prior to v1.1) (2 connectors on Z for Prusa Mendel and other dual Z printer designs).

2. Digital Trimpot for stepper current control.

3. Current limit on driver IC VCC to prevent permanent latchup.

4. Microstep mode configured by MCU through firmware (no jumpers needed).

5. Test points for driver control signals.

6. Step and Direction pins are on their own ports for synchronous movement.

Capability

1. Extra driver ports broke out for up to 3 additional drivers (some of the motor extension pins are shared with max endstop and a pin allocated for SPI-SS extensions).

2. PWM DC outputs (Extruders, Fans, etc.)

6 Outputs

1. Low resistance mosfets for cool running.

2. Indicator led for each channel.

Power

1. Three independent power rails for flexible input power configurations.

2. Heated Bed, 15A 12-24V (version earlier than 1.1 limted to 14A 16V due to fuse rating, see rambo_development for hacks).

3. Extruders and fans, 5A 12-24V (fuse can be exchanged for up to 10A capacity) 10V-26V input voltage.

4. Motors, 5A 12-24V (fuse can be exchanged for up to 10A capacity) 10V-26V input voltage.

5. Built in SMPS for 5V generation.

PCB

1. 4 Layer.

2. 2oz copper on all layers.

3. High quality, High temperature FR4-TG130 PCB.

4. Gold ENIG finishing.

Powering for RAMBo

1. Different versions of RAMBo require different power rails connected to power the logic.

2. Please see the page for your board:

See RAMBo v1.1 for information applicable to version 1.0 through 1.1.

See RAMBo v1.2 for information applicable to version 1.2.

USB Driver

1. Windows requires a driver to communicate with RAMBo.

2. Download this file File:RAMBo USBdriver.zip and unzip it into a known location on your computer.

3. In windows 7, plug in your RAMBo board, and let windows fail to find the driver. Then, go to the start menu, right click on computer and click properties. On the left, click on Device Manager.

4. Scroll down to Unknown Devices, and right click on RAMBo. Choose Update driver.

5. Click on \"Browse my computer for driver software\", then click on \"Let me pick from a list of device drivers on my computer\", then click the button for \"Have Disk\" and then click browse and point it to the file you downloaded above.

Linux and MacOS use the built in CDC driver. RAMBo should show as a option in your 3D printer control interface (dev/ttyACM0, etc.).

We confidently assure you'll be satisfied with what you get.However, If  there's a chance that you are not satisfied with our goods or something else, please let us know before leaving us a Negative feedback. We will try our best for 100% customer satisfaction. Your 5-Star Positive Feedback is much appreciated to us, and your satisfaction is our greatest motivation to move forward.Welcome to Shop Here! Want more Items? Please come & visit our SHOP.

*Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 5 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).Your satisfaction is our first priority.

*If you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.