Nail Gun Wall Fastener Multifunctional Ergonomic Design Strong Penetrating Manual Silencing One-handed Operation Pneumatic Tool

Nail Gun Wall Fastener Multifunctional Ergonomic Design Strong Penetrating Manual Silencing One-handed Operation Pneumatic Tool

s:

Type: Mini Nail Gun

Material: Alloy steel + rubber

Gear position: Adjustable in three gears

Gun head weight: 640g

Total length of product: 325mm/330mm

Suitable for shooting nails: mini shooting nails with a diameter of about 7mm

Scope of application: engineering suspended ceiling, light steel keel, ventilation pipeline, water and electricity pipeline timber, air conditioning, bridge, etc

Features:

1. Compact and convenient,Light weight, small size, one-handed operation.

2. 1.Quty. The spray gun is made of solid metal, equipped with anti-slip rubber handle and anti-slip shield, explosion-proof barrel, safe and durable.

3. Double silencer,not disturbing the people,Low noise, fearle, long-lasting work. The harder the object, the lower the noise.

4. Easy to use,Easy slag removal, efficient heat diipation, and no sticking.

5. Controllable power with three levels of adjustment

6. Dual electroplating proce,Effectively protecting the gun head, enhancing heat diipation function, continuously working without exploding the chamber.

7. Widely used. Suitable for red brick wall, concrete wall, 4mm metal plate and thick plank. No large amount of dust, energy saving and environmental protection

Packing included: Selected as shown

Note:

Random shipment due to slight differences in appearance due to gradual product upgrades

Material differences do not affect usage, please take photos with caution if you mind

Note:

1. Before use, it is neceary to carefully read the instruction manual.

2. It is strictly prohibited to pre the nail fixing hole at the front end of the top pipe of the nail fixing device by hand under any circumstances.

3. It is strictly prohibited to gn the fixing device nail holes with ones or others under any circumstances.

4. It is strictly prohibited to pre the nail tube while stapling, and it is strictly prohibited to not hold the sliding sleeve with one hand when stapling.

5. It is strictly prohibited to use fixtures in ps with flammable and explosive materials.

6. Non staff and minors are not allowed to use this product.

7. Users must wear protective equipment to reduce physical exposure during operation: protective clothing, construction hats, protective masks or goggles, earmuffs and , etc.

8. When using, it is neceary to maintain the fixture perpendicular to the striking surface, and the distance between the striking edge and the substrate edge should not be le than 100mm; Avoid other personnel near the operation area to avoid damage caused by nails or flying debris from the substrate.

9. If the substrate is relatively soft and thin, there should be no one on the opposite side to prevent the nail from penetrating the substrate or the substrate fragments from protruding and injuring people.

10. During the fastening operation of the stabilizer, dust covers must be used to prevent material splashing on the working surface.

11. Remember to remove the nail every time you use it. If the fixture is hit multiple times or used for a long time, it should be promptly disaembled, cleaned, and inspected, and vulnerable parts should be repd. Otherwise, the excitation effect is not ideal. Generally, clean it with kerosene and do maintenance work to extend its service life.

12. If the shot is not succefully fired during use, do not aim the nail shooter at yours or others, and do not directly touch any part of the nail body with your hands. The gun head should be facing the ground, wait for 3-5 seconds, and then compre the barrel with one hand while using an external object to remove it with the other hand.

13. Should be no integrated nails in the fixing device. When the nail ejector malfunctions, the nails should be removed first and then repaired.