This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
In stock
Shipped from abroad
Free return within 15 days for all eligible items.Details
Sweet Memories
66%Seller Score
24 Followers
Shipping speed: Poor
Quality Score: Excellent
Customer Rating: Average
Congratulations on your purchase of this Moisture Meter. This instrument is a conductivity moisture meter specifically designed for the wood industry.
The instrument has four calibration scales, enabling the user to take accurate moisture measurements in 100 wood species. Moisture measurements can be taken using the integral pin electrodes.
This meter is shped fully tested and calibrated and, with proper use, will provide years of reliable service.
1. Measurement pins
2. Low battery icon
3. LCD measurement reading
4. Hold indicator
5. Wood group designator
6. Power on-off on
7. Mode on to select wood group
8. Hold on
9. Simply descrtion of each wood group
Operation:
Caution: The electrode measurement pins are extremely sharp. Users care when handling this instrument. Cover the pins with the protective cap when the instrument is not in use.
Measurement Instructions:
1. Remove the cap to expose the needle electrodes.
2. Power ON the Instrument.
3. Select the appropriate wood calibration scale A, B, C, D (See the Wood Calibration Tables later in this guide) Using "MODE" on.
4. Push the needle pins into the wood and observe the reading.
5. Power OFF the instrument.
Auto Power OFF:
This instrument will be Auto Power OFF if there is no any on preing in 15 minutes. This design is for saving battery power consumption.
Care and Maintenance:
When the instrument is not in use, store the instrument in a stable, dust-free environment out of direct sunlight. Remove the battery from the instrument if it is to be stored for periods of more than one month, or when the low battery power symbol appears on the display.
Battery replacement
When the low battery icon appears on the display, replace the battery as soon as practical.
1. Remove the rear battery compartment cover.
2. Replace one 9V battery.
3. Cover the compartment door.
Specifications:
n Display: Large LCD characters display
n Measurement princle: Electrical resistance
n Range: Wood: 0~99.9%
n Resolution: 0.1%
n Accuracy: ±0.5%
n Electrode length: 10mm(0.4")
n Electrode pins: Integrated
n Auto Power OFF: After approx.15 minute
n Power Supply: One 9V battery(NOT included)
n Meter housing: ABS plastic
n Operating Temperature: 0 to 40 (32 to 104)
n Dimensions: 145 X 67 X 32mm (5.7" x 2.6" x 1.3")
n Weight: 200g (7.0 oz)
Wood Species Group Table:
Wood Group
Wood Specie
A
Teak, Walnut, Afrormosia, Rubber Tree, Imbuia, Kokrodua, Niove Bidinkala, Cork
B
Keruing, White Poplar, Beech, Cedar, Tola
C
Lauan, Ash, Elm, Fir, Maple, Padauk, Oak, Cherry
D
Bawood, Larch, Pine, Birch
About shping
This product has no ratings yet.
Subscribe to our newsletter
and be the first one to know about our amazing deals!