MPPS V18 mpps v21 Version V18.12.3.8 Breakout Tricore Cable OBD Breakout ECU

New MPPS V18 mpps v21 Version V18.12.3.8 Breakout Tricore Cable OBD Breakout ECU Bench Pinout Cable Good new!! MPPS V21 Red one will not lock!!! Version: MPPS V16/MPPS V18/MPPS V21 Support Multi-languages:

Afrikaans, Albanees, Bahasa Melayu, Czech, Cymraeg, Dansk, Deutsch, Esti, English, Espanol, Filino, Finnish, Francais, Galego, German, Hrvatski, Indonesia, Italiano, Kiswahili, Latviesu, Lietuviskai, Magyar, Malti, Nederlands, Norsk, Polska, Portuguese, Romanian, Slovencina, Slovenski, Srpski, Suomea, Svensk, Turkish

Function:

1. Recalculation of checksum

2. Read / write flash

3. Read and write the Data of Engine ECU

Windows System: Windows 7

Warming Ts:

1. Please install on Win7 system(close anti-virus program) 2. Please install driver well then open the software, or software can't be opened. Please make sure you use the driver from our CD, NOT use driver for other MPPS version. This module adds support for advanced functions on for Marelli ECU's. MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, for Delphi, for Siemens, for Marelli, for Delco, for Sagem, for Trionic and many other.

MPPS V18.12.3.8 Features:

1. Read / Write of Micro, Flash and EEprom without using a BDM programmer!

For Fiat 6F3-  Full Read / Write Micro, Flash and EEprom over K-line and CAN.

For Fiat 6JF - Full Read / Write Micro and EEprom over K-line.

For Fiat 8DF - Full Read / Write Micro and EEprom over K-line.

For Fiat 8F2 - Full Read / Write Micro and EEprom over K-line and CAN.

For Fiat 8F3 - Full Read / Write Micro and EEprom over K-line and CAN.

For Fiat 8GM - Full Read / Write Micro and EEprom over CAN.

For Fiat 8GS - Full Read / Write Micro and EEprom over CAN.

For Fiat 5SF3 - Full Read / Write Flash and EEprom over CAN.

For Fiat 5SF3 - Full Read / Write EEprom over K-Line.

For Fiat 5SF8 - Full Read / Write Flash and EEprom over K-line and CAN.

For Fiat 5SF9 - Full Read / Write Flash and EEprom over CAN.

For Fiat ME7.9.10 - Full Read / Write Micro over CAN.

For Fiat ME7.6.3 - Full Read / Write Micro over CAN.

For Opel 6O2 - Full Read / Write Micro, Flash and EEprom over K-line and CAN.

For Opel 6O3 - Full Read / Write Micro, Flash and EEprom over K-line and CAN.

For Opel 6JO - Full Read / Write Micro and EEprom over K-line

2. Supports the latest drivers EDC16, EDC17, MED9.x, For Siemens PPD1 / x, EDC15, ME7.xi much more...

3. This module adds boot mode support for controllers with the tricore proceor.

Features:

Auto detects ECU and proceor type. No need to select from list, everything is automatic!

Read/Write of all memories Eeprom, Irom, Xrom (where poible)

Patch function for OBD Flashing of TPROT ECU's (supports only VAG at the moment)

TPROT / DS check feature, for testing if TPROT is active without opening ECU.

Supports For upto TP12

Supports For Siemens (current only for ECU's without paword protection),

Support for unlocking of VAG Simos PCR and For Simos 8.

Checksum Correction supported for  MEDC17.

4, The MPPS is a powerful programming tool. It offers general reading / writing operations and checksum support, however it also includes some additional features: Excellent recovery functions. In some cases MPPS can recover ECU's which others tools can not even make communications with. On certain controllers it even works when with no program is present (a blank memory).

Selectable full / partial reading and writing when the ECU allows this function. Selectable reading / writing speed.

Writing "changes only" function for faster programming (when supported by the ECU). Auto detection of K-Line/CAN, and option to bypa and force preferred means of communication.

Temporary bypa of immobiliser to allow flashing on the bench on ME7 syst.

Boot mode support for ECU's with C167 and ST10 proceors.

EEprom read/write functions for some ECU's are included.

For VAG MEDC17 TPROT level checking without opening the ECU.

Notice: please choose software V18 only to install, V21 software would be blocked the device.

If you use V21 software from the other website, please be responsible by yourself.

Package List:

1pc x MPPS ECU Ch Tuning

1pc x CD

1pc  x USB Cable

MPPS V18.12.3.8 Breakout Tricore Cable

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.