1. The inner diameter of the right hand handle without the throttle core is larger, which is suitable for models where the throttle core cannot be disassembled.
2. The product adopts a horizontally wound structure of heating wires, which is much more complex than other structures on the market, but it receives even force when rotating and has excellent comfort. The heating power and electricity consumption are only half of similar products, and the heating effect is better. It is a truly high-efficiency and energy-saving electric heating handle.
3. The handle is made of high-temperature-resistant nitrile rubber and is molded in one step. It has an ultra-thin special switch for the electric heating handle and a removable cover that can be sealed or opened for free switching.
4. Advanced electronic temperature control system consumes no power and can better protect the battery. The high-quality handle switch is more exquisite than the old handlebar.
5. The product wires are sheathed with silicone and can be used in extremely low environments. Silicone has particularly good aging resistance and will not age with time (older wires do not have silicone protective sheaths)
Input working voltage:12V
Handle type:Sealing or opening electric heating handle
Installation Notes:
[1] First remove the left hand handle of the car
[2] Wet the inner hole of the left hand handle with soapy water. The twisting range should not be too large during installation. There should be enough room for rotation of the power cord of the right hand handle.
[3] When installing the balance iron on the left hand handle, adjust the position of the balance iron to be slightly separated from the handle. Do not squeeze the handle when tightening the screw. If the left hand handle slides on the steel pipe during use, remove the balance iron and point itfrom the end of the handle. Fix with a few drops of 502 glue
[4] On the throttle, you only need to remove the soft rubber. After removing the soft rubber, install the right handlebar. The oil twister does not need to be removed.
[5] Wiring method, the red wire is connected to the positive pole of the power supply, and the black wire is connected to the negative pole of the power supply (Note:Do not connect reversely)
Due to different batches, there may be differences in product appearance, color, and printed text, which will not affect the use.
Colour:Black
Material:Plastic
Size:Handle diameter:22mm; Left hand handle: 125x35MM; Right hand handle: 127x35mm
Package Contents:
1set x Motorcycle Hand Heated Grips
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !