Motorcycle Electric Heating Handlebar 12V Heated Handle Grip

Detailed Information About The Product:

[Operating Instructions]: [1] Power on: the red light, blue light, and green light flash once each and then go out. [2] Standby: The red light is breathing and flashing, and when the temperature reaches the highest level, it automatically changes to the blue light in mid-range. [3] Working status: The indicator light is always on (high range: the red light is always on, mid-range: the blue light is always on, low range: the green light is always on)
[Operating Instructions]: [4] Press and hold the power goodon for 3 seconds: enter standby mode or shut down [5] Click the switch key: switch gears
[How to use the switch]: Press and hold for 3 seconds to turn on the phone, the red breathing light will turn on. After reaching a certain temperature, it will automatically turn to blue.Press it once to change to the blue light. The temperature is medium temperature. Press twice and it will turn green.The temperature is The lowest,press three times for the red three-level high temperature, press and hold for 3 seconds to shut down.22MM handlebar inner diameter, suitable for most motorcycles.
One-piece molding prevents rain and dust from entering internal parts, making the service life longer and . Built-in intelligent temperature control chip, three levels of adjustable temperature, intelligent temperature control is . Double throttle cable buckle, installation range. Sealable and open-mouth design does not affect the installation of handle plugs on the outside of the handle, so that lights and other decorative accessories can be installed.
The product has added a standby mode. After switching to the standby state, the electric heated handle will automatically adjust the temperature to about 50 degrees.Handle temperature:low temperature 40°C, medium temperature 50°C, high temperature 60°C (the above data are obtained from experimen, the laboratory room temperature is 15-20°C, the specific values due to objective factors such as voltage and environment) There may be slight fluctuation, for reference only) Product wiring method:
1. Connect to the circuit of the motorcycle electric door lock (behind the key), the red wire to the positive output wire of the electric door lock, and the black wire to any negative pole or ground on the car [This method is suitable for those who do not want to use it, Riders who are in standby mode but tend to forget to turn off the switch]
2. Connect to the positive and negative poles of the battery.The red wire is connected to the positive battery pole [+], and the black wire is connected to the negative pole [-] of the battery.Warm reminder:When wiring, connect red to the positive pole and black to the negative pole.If the connection is reversed, the switch will burn, but the handle will heat up,so when wiring, please confirm the positive and negative terminals before wiring to prevent burning.
Suitable good diameter:22mm
Input voltage:DC12V
Product power:red light 35W,blue light 25W,green light 17W
Handle type:Sealing or opening electric heating handle
Switch type:Multi-level adjustable temperature control switch
Applicable models:12V motorcycles with handlebar diameter of 22mm
Due to different batches,there may be differences in product appearance,color,and printed text,which will not affect the use.
Colour:Black
Material:Nitrile material
Size:Left hand handle:137x30MM;Right hand handle:125x30mm Package Contents:
1set x Motorcycle Hand Heated Grips Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !