Motherboard Makerbase MKS GEN L with 5pcs DRV A4988 Driver + 3D Touches Module Set for 3D Printer New,Red NO5247

Features:

MKS GEN L Description:

1. Combine 2560 and ramps1.4 on one board, which solves the problem that the Ramps1.4 combination interface is cumbersome and easy to malfunction.

2. Users can replace the motor drive by themselves, support 4988 drive and 8825 drive, TMC2100 drive

3. The external drive signal is reserved, and a large drive can be connected to drive the 57.86 motor.

4. Using high-quality MOSFET tube, the heat dissipation effect is better, and the long-term work is stable.

5. Using dedicated power chip, support 12V-24V power input, solve the heat of Ramps voltage conversion chip. Power shortage problem.

6. Stable and reliable filter circuit greatly reduces the possibility of interference, and it is most likely to avoid the phenomenon of crashes during the printing process.

7. Adopt CH340 serial port chip to reduce the cost under the premise of ensuring stability and reliability, and solve the problem of 16U2 hard-to-install drive in the past.

8. Can accept 24V input, the same system power can reduce the hot bed current to 1/4, effectively solve the hot bed MOS tube heating problem.

9. Using the open source firmware Marlin, the configuration is exactly the same as ramps1.4, which can directly replace Ramps1.4.

10. Can directly connect 2004LCD display and 12864LCD display, can support TFT28, TFT32 touches screen.

11. The XYZ axes use different color terminals to correspond to the motor and limit switch for easy wiring.

12. User-friendly design, use different color terminals to distinguish the driving direction, reduce the probability of insertion and reverse, and prevent the motherboard from being damaged due to the drive insertion.

A4988 Driver:

1. Suitable for driving stepper motors up to 8V-35V 2A.

2. Only a simple stepping direction control interface.

3. Five different step modes: full. Half. 1/4. 1/8 and 1/16.

4. The adjustable potentiometer can output the maximum current output for a higher step rate.

5. Automatic current decay mode detection/selection.

6. Overheat shutdown circuit. Undervoltage lockout. Cross current protection.

7. Ground short circuit protection and load short circuit protection.

D-touches is a fully automatic universal 3D printer hot bed leveling probe (automatic leveling probe)

Its advantages are simplicity, compactness, high precision, good compatibility, and compatibility with all bed materials, such as glass, metal, wood, plastic, acrylic, etc.

We confidently assure you'll be satisfied with what you get.However, If  there's a chance that you are not satisfied with our goods or something else, please let us know before leaving us a Negative feedback. We will try our best for 100% customer satisfaction. Your 5-Star Positive Feedback is much appreciated to us, and your satisfaction is our greatest motivation to move forward.Welcome to Shop Here! Want more Items? Please come & visit our SHOP.

*Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 5 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).Your satisfaction is our first priority.

*If you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.