MK8 Extruder 0.4mm 12V 1.5A 1.75mm Full Metal Nozzle Print Head For 3D Printer

Specification:
Nozzle diameter: 0.4mm
Movement axis speed: 10-100mm
Nozzle flow rate: 100 mm/high speed printing
Print Material: ABS PLA 1.75mm
Voltage of heating nozzle: 12V
Normal working temperature: 90°- 250°
Rated current: 1.5A
Holding torque: 400mN.m Min
Thermistor: 100K NTC

Note:
Heating nozzle 12V, the normal operating temperature is 90°to 250°. So do not set the maximum temperature exceed 280°. High temperature is easy to damage the refractory material.














a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a