Mini Oscilloscope 0KHz Bandwidth 2.5MHz Sample Rate Siave/Square Wave/Half Wave/Sink Wave Oscilloscope

Features:

*1. Equipped with a 2.4-inch TFT display, 320*240 resolution, you can see the measurement data displayed on the screen. 

*2. 2.5MHz sample rate, 200KHz actual bandwidth, 0KHz analogue bandwidth (sinewaves). 

*3. With complete trigger function (single, normal, automatic), no matter for periodic analogue signal or non-periodic digital signal can be used freely. 

*4. The measurement of the voltage signal is up to ±400V. 

*5. The efficient one-click AUTO function displays the measured waveform without tedious adjustment. 

*6. Waveform measurements display functions that can be used to detect sinewaves, square waves, half-waves, sink waves, etc. 

*7. With one-button waveform saving feature. Only the part of the waveform that is currently being displayed can be saved. 

*8. Widely applicable, it can be used in a wide ranges of applications such as automotive maintenance, appliance maintenance, teaching, and research.  

Description:

*1. Name: Oscilloscope

*2. Material: plastic

*3. Type: standard configuration, high configuration (optional)

*4. Rate of adoption: 2.5MHz

*5. Analogue bandwidth: 0KHz

*6. Actual bandwidth: 200KH

*7. Measuring ranges: X1/土40V; X10/土400V

*8. Input impedance: ΙΜΩ

*9. Depth of storage: 1Kb

*10. type: 12

*11. PWM output: 

Frequency: 1K-80KHz 

Duty: 0-100% 

Voltage: 3.3V

*12. Function: 17 Waveform

*13. Output:

Frequency: 1-1KHz 

Voltage ranges: 0-3.3V (fix)

*14. Display: 2.4" TFT 320*240 Resolution ratio

*15. Charging voltage: 5V

*16. Battery capacity: 1 * 3.7V, 600mAh (included)

*17. Upper computer: Not supported for now

*18. Firmware upgrade: Support

*19. Item size: * 100mm / 1.97 * 3.94in

Packing List:

01: Standard configuration, ±40V

1 * Oscilloscope

1 * Clip

02: High configuration, ±400V

1 * Oscilloscope

1 * Probe

1 * Clip

Note:

1. Some of the measured signals cannot be correctly captured with AUTO and need to be adjusted manually. 

2. Firmware upgrade: To upgrade the display part, pre OK to turn on the machine, to upgrade the bottom part, pre SAVE to turn on the machine.