Milight 2.4G Wireless E27 RGBW LED Spotlight Dimmable Bulb LampRemote RGBWarm White RGB White

This bulb can work with RGBW remote control, or by iOS or Android App via WiFi controller. Please read the instruction manual carefully before using. Quick and easy installation of the smart LED Bulb is the same as any common light bulb. The bulb must be screwed into the light socket and switched on at the wall for 2.4Ghz wireless operation, allowing the remote control/App to turn the LED bulb on/off, /brighten and change. Secure communication is done by syncing the remote/App and bulb once.



Programs

Program1 (RGBW Fade in Fade out)

This program fades in and fades out the red, green, blue and white one after another.

Program2 ( Flash)

In this program, red, green,blue, white yellow purple flashes to change.

Program3 (Disco)

Different strobe and flash to change.

Program4 (Red Ramp up and Flash)

In this program, red brightens from 0% - 100% and shuts down, then flashes three times.

Program5 (Green ramp up and flash)

In this program, green brightens from 0% - 100% and shuts down, then flashes three times.

Program6 (Blue ramp up and flash)

In this program, blue brightens from 0% -100% and shuts down, then flashes three times.

Program7 ( change + flash)

Here several colors fade into each and then flash randomly.

Program8 (Fade in and fade out)

Here different colors fade into each .

Program9 (Strobe white)

Just white flashes up.



Tips

To all RGBW lights at once or change the ，first press "Master ON".To do this with individual lights,first press"Zone ON".Secondly,choose the brightness according to the ring or brightness ring.



Linking new lights to the remote controls

1. Choose which zone you want to assign the light (1 to 4)

2. Switch off the main supply of the light in the selected zone with the main switch or pull the plug from the socket.

3. Now switch on the light again and within 3 seconds shortly press one of the 'zone on' buttons one time on the remote control.

4.when this link operation is successful, the light slowly blinks 3 times on and off.



Unlinking the lights

1. check via the remote control to see which zone (1 to 4) is already linked to a light.

2. Switch off the main supply of the light with the main switch or pull the plug from the socket.

3 Now switch on the light again and within 3 seconds press 5 times quickly and shortly on one of the 'zone on' buttons which you want to link.

4. When this unlink operation is successful, the light quickly blinks 6 times on and off.



Grouping of several lights

You can add an endless numbers of lights to a zone on the 4 remote by linking the lights to different zones. This way you are completely flexible in creating different group combinations. below you can see some grouping examples.



Mi-Light - APP Download

1.iOS app for iOS 5 or later ( / iPad):

https://itunes..com/de/app/milight/id680443167?mt=8


a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a